Can Am 9 mm 124 grain round noesed

Don'tkillbill

Don'tkillbill

CGN frequent flyer
Rating - 100%
40   0   0
Location
Maritimes
Anyone care to share there formula and OAL?

124 grain with vvN320 3.6 to 4.1 grains. 1.15 oal. At least that's what I am going to try.

Actually any pet loads using Can Am would be a good thread I think.
 
Don'tkillbill said:
Anyone care to share there formula and OAL?

124 grain with vvN320 3.6 to 4.1 grains. 1.15 oal. At least that's what I am going to try.

Actually any pet loads using Can Am would be a good thread I think.
Click to expand...

I'm doing the same type of research. http://www.canadiangunnutz.com/forum/showthread.php/1233264-Anyone-using-N320-for-9mm

Here is a link to the Lapua website with their load data for N320: http://www.lapua.com/en/products/reloading/vihtavuori-reloading-data/relodata/6/34

From the Lapua website, they are recommending 3.8-4.1 with a COAL of 1.142". Hope that helps.
 
The starting point is what gun are you shooting, and what feeds in it. I use around 1.12 in a CZ, and I know people that load shorter. Charge could vary greatly depending on this. 1.14 don't work too bad in mine, but not perfect. I have never used the mystical scandinavian fairy dust, but I'm interested too.
 
Campro 124gr FCP RN with 4.1gr of Titegroup, COAL of 1.14". Works great in the CZ75B, Steyr L9A1, Girsan, G17, and Viking that I've tried them in.
 
4.7 gr Unique, CCI 500, 124 cam pro RN at 1.15" which came in around 1140-1180 fps through my 75 shadow.
Going to back it down to something closer to 130 PF.
 
4.5gr Hodgdon Universal, 124gr Campro RN, CCI 500 primer, 1.15". Very accurate and no issues in my Sig P226 or friend's Glock 17
 
Going to try 3.6 grains of N320 with 1.15 with the 124 grain bullet. Hopefully it cycles and shoots well.

I also will test a load with some speer lead 9 mm. I prefer jacketed 9mm but I have a few to use up so I need to figure out a good load that won`t lead up.
 
You must log in or register to reply here.
Back
Top Bottom