Charles Daly CA612 - out of box issue

M

mBuxx

New member
Rating - 0%
0   0   0
Location
Ontario
My buddy has one of these and it actually seems like it eats anything. So I thought I’d give it a try. Unfortunately my luck was not the same. Trouble cycling rounds, not consistently, but enough to be annoying.

Decided to pull her apart for inspection, and what I found was 2 different orings used on the gas plugs. One much too small, and fat, it was already half missing when I took it off. Not sure if this will fix the issue, but wanted to share for anyone else that gets this. The correct size oring is a standard 011. I don’t know how to upload a picture, but all I really wanted to share was the o-ring size
 
mBuxx said:
My buddy has one of these and it actually seems like it eats anything. So I thought IÂ’d give it a try. Unfortunately my luck was not the same. Trouble cycling rounds, not consistently, but enough to be annoying.

Decided to pull her apart for inspection, and what I found was 2 different orings used on the gas plugs. One much too small, and fat, it was already half missing when I took it off. Not sure if this will fix the issue, but wanted to share for anyone else that gets this. The correct size oring is a standard 011. I donÂ’t know how to upload a picture, but all I really wanted to share was the o-ring size
Click to expand...

Thanks for the tip.
 
Just wanted to report back and say this does appear to have fixed the issue. Ram through 70 rounds and smooth as butter
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom