Chassis for CZ 455 - advise

[Meroh]

I have an Area 419 20 MOA now because it came on a rifle I purchased but I always used the MDT rail and it worked great. The only thing I would suggest is cut open a #8 lead shotgun shell and put 1 piece of lead inside each mounting hole before you tighten the mount down, so the grub screws won’t mark up the top of the receiver.

These are better yet than using a piece of lead shot: ht tps://www.mcmaster.com/brass-tipped-screws/ or ht tps://www.mcmaster.com/nylon-tipped-screws

 

[The ROC]

I will

My 457 MDT setup for CCI SV is 35# for both front and rear bolts. For SK Pistol Match the torque setting is 40#. That's about to all change now that I just re-crowned the muzzle over the weekend.

 

[remington jim]

I have a MDT LSS RF on order from Jerry at MYSTIC precision

So which Butt stock did you go with ? and Straight grip or Pistol grip ! Thxs RJ

 

[fljp2002]

CSS stock with straight grip

 

[The ROC]

CSS stock with straight grip

Pictures when completed!

 

[Recce21]

I have an Area 419 20 MOA now because it came on a rifle I purchased but I always used the MDT rail and it worked great. The only thing I would suggest is cut open a #8 lead shotgun shell and put 1 piece of lead inside each mounting hole before you tighten the mount down, so the grub screws won’t mark up the top of the receiver.

Well I ordered an MDT 20 MOA rail since it was a fraction of the price. The Area 419 was definitely more attractive to me but money talks these days.