I've recently come across a bit of a pickle.
I need to find a decent handgun that's under 300$, and I've found a few things that would do the trick but I need a second opinion.
Norinco M93 Woodsman .22LR autoloader: 150~$, only has ONE review, but overall, it looks like it would do the job. I'm favoring that one but I'm weary that it might turn out to be a complete POS.
Heritage Arms Rough Rider .22lr/.22WM S/A revolver: Most reviews indicate that it's a solid, well performing handgun for 180~$. Some say that
"On closer inspection, I saw the cylinder was not locking up correctly and was out of time. Basically, as you #### the hammer slowly, the cylinder would rotate forward, then drop back a bit in last portion of travel. When the hammer was dropped, the cylinder was misaligned with the barrel. By turning the cylinder by hand the bolt would click into the cylinder detents properly.
Also, there was obvious lead buildup on one side of the forcing cone, consistent with an out-of-time condition. I disassembled the gun and found the hand was coming apart. Specifically, a small stud which projects from the lower side of the hand, and contacts the hammer, had moved out of the hole it is pressed into. So I ordered a replacement $9 + $5 shipping. Took about 10 days to arrive. On reassembly, the pistol feels tight and the cylinder rotates smoothly and locks up solid."
Which is the only downside to the Heritage Arms.
Any other possibilities or thoughts on what plinker I could get?
I need to find a decent handgun that's under 300$, and I've found a few things that would do the trick but I need a second opinion.
Norinco M93 Woodsman .22LR autoloader: 150~$, only has ONE review, but overall, it looks like it would do the job. I'm favoring that one but I'm weary that it might turn out to be a complete POS.
Heritage Arms Rough Rider .22lr/.22WM S/A revolver: Most reviews indicate that it's a solid, well performing handgun for 180~$. Some say that
"On closer inspection, I saw the cylinder was not locking up correctly and was out of time. Basically, as you #### the hammer slowly, the cylinder would rotate forward, then drop back a bit in last portion of travel. When the hammer was dropped, the cylinder was misaligned with the barrel. By turning the cylinder by hand the bolt would click into the cylinder detents properly.
Also, there was obvious lead buildup on one side of the forcing cone, consistent with an out-of-time condition. I disassembled the gun and found the hand was coming apart. Specifically, a small stud which projects from the lower side of the hand, and contacts the hammer, had moved out of the hole it is pressed into. So I ordered a replacement $9 + $5 shipping. Took about 10 days to arrive. On reassembly, the pistol feels tight and the cylinder rotates smoothly and locks up solid."
Which is the only downside to the Heritage Arms.
Any other possibilities or thoughts on what plinker I could get?




























... I would suggest that you would be much happier if you were to purchase a mainstream firearm such as a Ruger MK "X" semi, Single Six revolver, Buckmark, or S&W 4/622 . Slightly more $$ than your choices, but still relatively inexpensive in an expensive sport, and all have far more accuracy/durability/fitment potential, support and available accessories, unlike something that is cheaply made of poor quality materials, with non-existent magazine availability and possibly embarrassing to get caught fondling in public
... Can you hear it now? "Hey, is that a Colt Woodsman, those are great, I've always wanted one!" And you say, "No, it's a $99.00 Chinese knock-off, and I just sliced my finger on a sharp trigger burr..." "How does it shoot?" And you proudly show him your 5 yard target that looks like someone was patterning a short, cylinder-bore shotgun with birdshot at 25 yards... Your decision 






















