Cheapest 9mm once fired and components?

[Bobby Ironsights]

Hi guys, before I spend six hours searching, thought I'd tap into the collective.

Who's got the cheapest 9mm once fired brass, and cheap bullets to feed my new (to me) walther P1?

This is my first 9mm.

 

[KK1]

I get most of my stuff from Higginson Powders.

higginsonpowders.com

 

[KK1]

1F Brass

$6 for 100 peices
$60 for 1000 peices

Bullets

$11 for 100
$110 for 1000

 

[Griffoneur]

9mm brass = FREE; You just gotta bend over and pick it up off the ground at the range.

Fronteir bullets are probably the cheapest followed by casting your own in lead.

 

[JBD]

cheap 9mm

When nbnagantsniper here has em he charges about 30 per thousand for once fired brass.

It is posssible to cast bullets for the 9mm. They need to be heat treated and quenched to stand up to the pressure. So if you cast your self the cost of bullets are very cheap.

10$ or so for 150lbs of wheelweights. Which will make 6000 bullets.

 

[Paulinski]

9mm brass = FREE; You just gotta bend over and pick it up off the ground at the range.

Ditto.

 

[Wendell]

Roller-sized, $40. per thousand.
http://www.wolfbullets.com/

 

[nickorette]

I usually get my bullets local. (I go with cast as well). It's cheaper than having it shiped to you most of the time.

Brass is $22/1000 once fired at combat masters.

 

[Paulinski]

Bullets are about $100 or $80 if you find them local.

Good brands are Hornady for jacketed or Montana / Frontier / Berry for plated.

I don't like to shoot lead so I use plated.

 

[.Ben]

check out "www.wolfbullets.com" they use fmj,cast and other bullets they will also reload ammo for you you can use their brass or send them brass....