Cheapest/reliable/dealer sold .22lr handgun?

[dustycanuck]

I have received my EE 22/45, man these are a real b@tch to dissassemble. Far from the 1911 simplicity!
Fully stripped and clean, i'm happy it shoots straight.

I found this site to have helpful info. Esp. the 'troubleshooting' page.

http://guntalk-online.com/2245detailstripping.htm

I've used the Federal blue bulk pack, Winchester 555 bulk, and Win Dynapoint 22 in mine. The few FTE / stovepipes I've had might be due to my noob technique. I'm trying to remember to do a lot, and I can't rule out limp-wristing as the cause.

 

[MartyK2500]

Ah man, that would of helped 2 hours go lol, i should of asked
Now that i have done it once i'm golden i got memory for this stuff. I just pushed out all pins and stripped, then cleaned/reassembled using the instruction book exploded diagram.
Wasnt as worst as some have made it to be, but that sear and sear speing we're driving me nuts to get in properly!
The only part i was not able to dissassemble was the loaded chamber indicator. Flushed it out with G96 and wiped properly.