Christensen Arms Modern Precision Rifle

Bartok5

CGN Ultra frequent flyer
Super GunNutz
Rating - 100%
308   0   0
Hello,

After a 15 week wait due to backorders from US demand, I finally received my new Christensen Arms Modern Precision Rifle (MPR) in 6.5mm Creedmoor about a month ago. I want to give a big shout out to Prophet River for bringing this beaùty across the line for me!.


20181005-230554.jpg



In a word, the MPR is amazing. After 2 range sessions wherein I broke in the barrel according to the simple factory directions, I was able to fire the group below as my first attempt with an unfettered barrel using Federal 140 gr Gold Medal Match ammo. Up to that point all of my shooting was done with a Magneto-Speed Chronograph strapped to the barrel to record Muzzle Velocities for different 6.5 CM loads. The 5-round group fired at 100m measures .27" and was witnessed by two fellow shooters, Kevin Nanson and Claude Lalonde.


20181024-204446.jpg



The MPR is designed to be as lightweight as possible without sacrificing precision rifle accuracy. This is so that the rifles can go afield as lomg-range hunting units. The 24" 6.5 CM stainless match barrel is turned down and then wrapped in a proprietary Carbon Fibre (C-F) cladding which combines heavy barrel stiffness with pencil-barrel weight and excellent heat conductivity for rapid cooling. All of this is possible due to Chrstensen Arm's proprietary C-F wrapping techniques and binding matrix composition. Other C-F components on the MPR include the MLOC Handguard and the fully-adjustable Cheek-Riser. Steel and aluminum components and major assemblies are lightened where possible, such that even the Bolt Handle is perforated and the Body fluted to minimize weight and facilitate a smooth throw. The MPR with a 24" 6.5 CM Barrel weighs just 8.2 lbs less the optic, Mount and Bipod. Fully-dressed with a Bushnell XRS II 4.5-30x 56mm scope, Badger Rings and Atlas Bipod, the rifle still weighs less than 11 lbs. As such, It is easily packed afield on a hunt, bringing precision rifle accuracy to the long-range hunting sport.


20181005-230845.jpg



Construction of the MPR exudes quality and precision throughout from the 4--chamber, user-tunable Muzzle Brake to the folding but supremely rigid and lightweight folding Buttstock with Bolt Handle capture. The Buttstock is particularly impressìve, offering a fully-adjustable Comb height and Length of Pull (LOP) combined with a vault-like locking mechanism and an innovative magnetic retention device which works extremely well when the stock is folded. The fully-adjustable Trigger Tech Trigger is excellent and easily set to a sub-2lbs pull with full drop protection.


20181005-231015.jpg



All things considered, I could not be happier with my Christensen Arms MPR. It is lightweight and easily handled (even in my wheelchair), yet shows terrific promise based on its initial performance with 140 gr FGMM ammo. This one gives my CADEX Guardian Lite .308 a run for its money at half the cost and weight. What's not to like?
 
Last edited:
Mark, that looks like an awesome rifle! A buddy of mine was just telling me that he had got one as well, sounds like the ultimate long range hunter. In your write up, you say that you're using a Spuhr mount but it doesn't look like that in the photo, maybe Badger rings? I'm curious what mount that is that you used for your RDS as I'm looking for one to use on my Mk5 (35mm)? Could it be mounted so the RDS is at 12:00 instead of 1:30 and how do you find using it for target acquisition in that 1:30 position? Sorry for the partial derail.
 
I'm curious what mount that is that you used for your RDS as I'm looking for one to use on my Mk5 (35mm)? Could it be mounted so the RDS is at 12:00 instead of 1:30 and how do you find using it for target acquisition in that 1:30 position? Sorry for the partial derail.

Hi Dave,

Thanks for catching my mistake with the mount. I had my Cadex on my mind for some reason. It has the Spuhr mount, with the Spuhr RDS Adapter attached at the 1:30 position. As for the RDS Mount on my MPR, I am not sure of the brand as it is unmarked and I found it in my parts drawer. I am pretty sure thst it is a cheap Chinese copy of somebody else's design. Tac Vector Optics makes a 35mm version that is sold for $18 CAD on Amazon.ca.

As for the 1:30 versus 12:00 mounting position, I prefer the 1:30 as I don't have to lift my head as high fŕom the scope to see the dot. At 12:00, the Elevation Turret somewhat obscures the ďot until you crane your neck. At 1:30 you simply look through the sweet spot between the Elevation and Windage turrets to pick up the dot. It is more finicky to zero the dot in the slightly off-kilter 1:30 orientation, but with a bit of trial and error it is readily achievable. This way, the orientation of my scope-mounted MRDS is the same for both of my precision Rifles, thus facilitating muscle-memory for the MRDS's use to either lay on distant targets with the magnified optic, or to engage targets at CQB distance. If you have low turrets, a 12:00 MRDS position may be ideal. Each to his (or her) own....
 
Hi Dave,

Thanks for catching my mistake with the mount. I had my Cadex on my mind for some reason. It has the Spuhr mount, with the Spuhr RDS Adapter attached at the 1:30 position. As for the RDS Mount on my MPR, I am not sure of the brand as it is unmarked and I found it in my parts drawer. I am pretty sure thst it is a cheap Chinese copy of somebody else's design. Tac Vector Optics makes a 35mm version that is sold for $18 CAD on Amazon.ca.

As for the 1:30 versus 12:00 mounting position, I prefer the 1:30 as I don't have to lift my head as high fŕom the scope to see the dot. At 12:00, the Elevation Turret somewhat obscures the ďot until you crane your neck. At 1:30 you simply look through the sweet spot between the Elevation and Windage turrets to pick up the dot. It is more finicky to zero the dot in the slightly off-kilter 1:30 orientation, but with a bit of trial and error it is readily achievable. This way, the orientation of my scope-mounted MRDS is the same for both of my precision Rifles, thus facilitating muscle-memory for the MRDS's use to either lay on distant targets with the magnified optic, or to engage targets at CQB distance. If you have low turrets, a 12:00 MRDS position may be ideal. Each to his (or her) own....

Thanks Mark. I had actually found that Tac Vector mount but was both leery of a mount made to fit both 34 & 35mm tubes as well knockoff Chico stuff in general. I'd be curious to hear how it holds up for you. Funny enough, although I'm sure it's a copy of something, I haven't been able to find the original product...

I did find out that Leupold makes replacement top caps for their Mk4 rings that will directly take a Deltapoint Pro so that's the route I'll be going. Sorry again for the off-topic. Great looking rifle and awesome group!
 
The price landed from Prophet River was $3425 plus tax, so approximately half the cost of a new, comparable (but much heavier) Cadex Guardian Lite system. Actually a very decent price for what you get. The Canadian price was almost exactly the US MSRP with the exchange rate applied, so no crazy mark-up by Prophet River. Just a long 16-week wait for my order to arrive. Kudos to Clay and the rest of the PR crew!
 
Last edited:
At this price its a lot of value suddenly!

Folder chassis with carbon fiber front end from MDT is $1350 before tax. 2k for the action and barrel nicely done is very reasonable.
 
Back
Top Bottom