Citori CX stock removal

[TransAm1991]

Good morning Gun Nutz.

I've put about 3,000 rounds through my CX, it's fall and I want to spend some time giving it a thorough cleaning.

After a few times where the barrel doesn't want to mate with the receiver I think it's time I spray out the hammers, springs, and firing pins.

I've read where I'll need a No. 1 or 2 phillips, some oil, and a big flat, do they come off fairly easily?

 

[rmsg0040]

#2 philips for the pad, oil the tips of the screwdriver when inserting

5mm extra long hex for the stock (they sell them on amazon if need be)

I made my own: ratcheting screwdriver with a 1/4 hex to 1/4 square adapter, 1/4 extension bar, 5mm hex key welded to a 5mm socket!

IMG_20220102_095539711 by Gopes Ram, on Flickr

 

[TransAm1991]

Oh that's easier than I anticipated.

I've got a 1/4" drive 5mm Allen key and sockets!

Thanks!

 

[rmsg0040]

Only resistance you will find is separating the wood from the receiver.