Citori Injectors

[Toodoggone]

I have a 1975 Citori. Shells are occasionally going past the ejector when loading or not being ejected after being fired. I ordered a new set of ejectors but on installing them they hit the extension screw and the extractor sticks out about 1/8” from being flush in the barrel. A side by side comparison of the old & new extractor shows that the new one can’t be filed down to fit as the stud on the ejector would be partially removed. The shop I bought the ejectors from says they are what is currently available.

Anyone have. Any idea on a fix for this. The rest of the Citori functions well and I’d like to get it functioning properly again.

Thanks in advance.

 

[FLHTCUI]

I usually recommend Arts Gun Shop for Browning troubles or info, but found this one.
Might offer up some hints and comparisons for your troubles today.
Regards,
Rob
[video=youtube;7c4RESXWP1g]https://www.youtube.com/watch?v=7c4RESXWP1g[/video]

 

[cosmic]

Your gun may be the first generation of Citoris, called a pre-type 1, that was made by Miroku. As such, the Browning inspired changes were not fully implemented. For example, the pre-type 1 has no engraving. I'm wondering if the ejectors were different on the pre-type 1?