cooey 37-a

[wade]

i have a 37-a 20 ga i it seems to need work on the extractor as a loaded round can be pushed past the extractor , but the barrel will not come off in the normal manner, there is a pin in the extractor that has moved to one side not allowing the barrel to come off, can i push out the big hinge pin to get it apart to repair ,,help please ,,,,wade

 

[Waba]

I hope you will find this thread helpful
https://www.canadiangunnutz.com/forum/showthread.php/2196634-Cooey-37A

 

[tokguy]

i have a 37-a 20 ga i it seems to need work on the extractor as a loaded round can be pushed past the extractor , but the barrel will not come off in the normal manner, there is a pin in the extractor that has moved to one side not allowing the barrel to come off, can i push out the big hinge pin to get it apart to repair ,,help please ,,,,wade

Use a thin sharp tool. like a stilleto blade, had it happen as a youth. Support the front stock so the pin has no load...rake the tip like you did picking locks on high school classroom doors.