Cooey 600 bolt disasembly

[jmichelin84]

Hello all, I'm looking to see how you would tear down a cooey 600 bolt, mine is very sticky but I want to make sure everything is fine with that because it was given to my mother by my grandfather as a wedding gift and he gave the bolt in parts to them, and I think I had the bolt in the mag tube too tight, a friend added a Teflon piece to it, it tightened it too much I believe. The rifle is in a new stock and it tips forward or back

 

[stampede]

Posting when you have been drinking is not a good idea.

 

[jmichelin84]

Posting when you have been drinking is not a good idea.

Voice to text actually my hands were greasy as hell lol, I'm about to start doing a point-by-point.
Mike Hui 600 I want to try to tear down the bolt to clean it completely, but I think it was a symbol wrong in the end but my father

 

[grauhanen]

For disassembly of your Cooey (Mike Hui) 600, see h t t p s://www.youtube.com/watch?v=bZf-YHdn04o

 

[jmichelin84]

For disassembly of your Cooey (Mike Hui) 600, see h t t p s://www.youtube.com/watch?v=bZf-YHdn04o

Thanks, I believe I watched that one, I was specifically asking about the bolt, I cannot figure how to take it apart haha

 

[grauhanen]

You can remove the bolt but don't know how to disassemble it? I've never done that myself. If it helps, here are some pictures of the bolt itself and broken down into the cocking piece and striker assembly.

For anyone looking for how to remove the bolt, see h t t p s://www.youtube.com/watch?v=0eqRK84tf8c

 

[ronnie01]

Info on bolt
https://www.google.com/search?client=firefox-b-d&q=cooey+bolt+disassembly

R

 

[jmichelin84]

Thanks and yeah I have not needed to disassemble the bolt on anyting my XPR rifles they tell me not to disassemble

 

[gunrunner100]

The indexing pin that goes 90’ across the rear of the bolt body is your start-off point. It runs completely through the bolt body and the striker. It may be difficult to see it on the opposite side but look hard.
Due to age, the striker may be seized to the body. Inside the front portion of the bolt there’s a nut that will require removal. Lots of fun but not impossible.

 

[jmichelin84]

The indexing pin that goes 90’ across the rear of the bolt body is your start-off point. It runs completely through the bolt body and the striker. It may be difficult to see it on the opposite side but look hard.
Due to age, the striker may be seized to the body. Inside the front portion of the bolt there’s a nut that will require removal. Lots of fun but not impossible.

Thank you I can see the spot opposite the indexing pin after tap that out it just seems like it's too tight for the reciever body lol