Cooey 64 parts list

bogie

CGN Ultra frequent flyer
Rating - 100%
495   0   3
Location
Vancouver
Anybody out there happen to have a Cooey 64 parts list? I need to identify a particular part on the back of the bolt. Long flat piece broken in 2 almost the same size as the firing pin. Above the extractor. Would this be the ejector?
Or maybe email the parts list?
 
if it is the flat piece at the left side of the chamber then it is the ejector. If the bolt still pulls out the casings, then the extractor is still ok.. The ejector is replaced by pulling off the barrel and putting the new ejector into the slot and replacing the barrel. Most often the ejector is broken when the barrel is twisted too far when it is taken apart. easily picked up from savage or a gunsmith. Can you send me pics? will pm you an Email addy if you can.
 
Indeed it is the extractor and I can see how they get broken. The one I just got was so crudded up I had to twist the barrel a little just to get it to move. Still the piece had been broken before and brazed but was almost completely broken thru when I got it. Western Gun Parts has one and the guy I got the gun from lives in Edmonton. Thanks guys and Marc I have downloaded the pdf.
Thanks loads guys. Huge help.
 
Thanks everyone I have the parts list I needed. Turns out he wants me to send the rifle back to him cuz it was broken and not in the condition described. Fouled shut and not shootable so not a good deal. He is going to do the right thing though. I will keep the list anyways as I am looking for one that shoots that is in just a bit better shape. Thanks all. That was fast:)
 
Back
Top Bottom