Copper fouled barrel?? 308

If you're getting MOA groups, then settle on a load and leave the copper right where it's at.

You shoot enough to know when you'll see the groups start to open up. Some rifles do this fairly quickly, while others creep towards it.
As mentioned, the real issue is that after you spend hours with all sorts of goop and polish and the bore is in as new condition, you'll have no way of knowing how many rounds it will take to bring the MOA groups back. Again, it could be a few, or it could be many.

R.
 
Read above mate.

It's zeroed for Her downloaded 150 gr loads.... But with mid to full power 180gr loads the same Zero works (eg 150g +2 inch at 100. & 180gr Bang on at 100m )

So I got interested in playing with 180grainers in it so as I can thump something solid with it in near future- not with her bullets haha.

We haven't shot a group with her 150s in a while TBH , hence can't really comment on yay or nay , an I'm getting MOA groups here an there with developing 180 fodder an hadn't tested enough RE seating to confirm a solid Heavy load yet 👍

Hope that makes a bitta sense on the situation

Yeah lol it was kinda rhetorical, sorry. Consider it like asking "who cares if theres some copper in the barrel?".

Plenty of people (not directed at you) take getting their barrels clean way too seriously, for nothing.
 
Last edited:
Well it was shooting them nice this evening- id only put some random oil stuff in the barrel an give a little scrub with scotchbrite pad patch.... copper was still there.
patched it clean an dry- then we shot it this evening-

the load of hers was pretty much 2 touching, or within 3/4 inch of each other on the 3 x 2 shot groups we messed around with- it needed a RE Zero for some reason yet to be determined.. :)


copper solvent an bronze brush is in post from LGS and will give big clean next week an pretty much Reload a bunch of rounds for her and zero it-
then ill carry on an develop some 180grain loads again
 
Scotchbright and random oil? What a way to ruin a barrel. If the barrel was full of rust maybe. But why are you doing that to remove copper that might not actually be a problem?

Insane.
 
Scotchbright and random oil? What a way to ruin a barrel. If the barrel was full of rust maybe. But why are you doing that to remove copper that might not actually be a problem?

Insane.
Some sort of biodegradable , gun cleaner stuff... Otis brand.

She's right mate , calm ya farm over there
 
Some sort of biodegradable , gun cleaner stuff... Otis brand.

She's right mate , calm ya farm over there
How do you know that? It ain’t the oil that’s the problem. It’s the abrasive you shoved down the bore.

Rub that scotchbrite pad on the outside of the barrel.
 
This is my personal experience and opinions.

Others may disagree.

All other things considered,
How does it shoot?
If accuracy is good, do nothing.
If accuracy is not good, copper fouling is easily removed with a wide variety of products.
I like “Shooter’s Choice” branded stuff but it can be hard to find.
Some rifles actually shoot better with a bit of copper fouling.
In my experience, its not the kind of thing that builds and builds. It gets to an equilibrium and if it shoots well at that point, then u can essentially do nothing forever.
But if u are shooting a different bullet, then fouling may need to be removed.
Likewise if u want to start every session with a baseline and “foul-in” each time, thats an option too. (I think a lot of PRS types do this).

In my experience, a “fouled” barrel is more predictable and I have observed that i can shoot almost anything out of my 308, 243, 223, and 6.5 Grendel and get good results but if I then switch to monos (Barnes for ex) then i shud clean first. Maybe because barnes monos are harder than yoir average jacketed bullet.

If all i shoot is barnes monos (such as in my 308 and 6.5 Grendel), then I literally never clean and i have never had to.

Excellent accuracy and zero maintenance. Thats a winning formula for me.
 
Back
Top Bottom