Take the advise here and dont' unwrap it to check out all of the drawing numbers and manufacturer's codes. Just cut paper at the back of the receiver and on the right hand side just enough to move the op rod out of the way of the date codes on the right side of the barrel. One more place would be on the left side of the stock below the rear of the receiver to see if it has the stock cartouche. You may be able to tell if it has seen active duty by the clearness of the cartouche here. If it looks like it is perfect and not sanded or worn down from use, it will be a good indication that the stock is new. You will also be able to tell if that serial number (date of manufacture) matches the inspectors initials on the stock cartouche. There are specific people that were in charge during the manufactue of these rifles during certain times. The serial number for a new rifle will have to have the correct inspectors cartouche for that time period. Here is a good place to match them up:
http://www.northcapepubs.com/m1gar.htm#Those Darned Stocks
Be very careful as you go. If it is truely a new in wrap rifle, you will have to keep it that way to retain a good deal of the value. Unwrapping it could cost you hundreds of dollars! Don't give into the temptation!
Ian
http://www.northcapepubs.com/m1gar.htm#Those Darned Stocks
Be very careful as you go. If it is truely a new in wrap rifle, you will have to keep it that way to retain a good deal of the value. Unwrapping it could cost you hundreds of dollars! Don't give into the temptation!
Ian




















































