Crypto: Builds / Parts finder/ Technical info / Questions / Go to

[Gingerbeef117]

So here's my build so far

-Crypto receiver (obviously lol)
-Sheild Rifleworks sr556 mwMatch Mod 2
-Surefire warcomp
-Radian Raptor charging handle
-Triggertech Duty trigger
-Aero LPK
- Black Nitrided stainless gas tube
Superlative arms adjustable gas block
-Bravo Company BCG in FDE
-Bravo Company MCMR 15 hand guard
-Stealth Recoil spring
-Milspec buffer tube, castle nut & BCM QD endplate
-Magpul furniture in FDE
-Anti walk trigger pins
-The damage so far..... $3888

..... now if only the receiver would show up already.

 

[stumo]

Probably 100 rounds through mine today first time out. 1 FTF and probably half a dozen times where the bolt didn't lock back on last round, this is with stock mags

 

[Tvw]

Probably 100 rounds through mine today first time out. 1 FTF and probably half a dozen times where the bolt didn't lock back on last round, this is with stock mags

Had my rifle not hold the bolt back a few times when I had it out. Just out of spite I pulled the bolt out and sprayed the absolute sh*t out of it and the inside of the upper and she ran perfect after that.

 

[rugbydave]

Probably 100 rounds through mine today first time out. 1 FTF and probably half a dozen times where the bolt didn't lock back on last round, this is with stock mags

factory rifle, not builder kit, correct?

 

[stumo]

factory rifle, not builder kit, correct?

Yes

 

[Tvw]

First thing I would try is Oiling the heck out of the BCG and the internals of the upper. Would then pull the hand guard and check the alignment of the gas block.

 

[JasonGTA]

...

 

[Dscott14]

Heres mine

Barrel: Faxon Firearms, 20.0” Gunner Series
Handguard: Bravo Company USA, Gunfighter MCMR-15 Alpha Handguard, M-Lok
Flash Hider: Smith Enterprise Vortex
Light: Streamlight Protac
Backup sights: ARMS
Selector: BCM Ambi selector
Charging handle: Radian Weapons Raptor LT Ambi
Optic: Aimpoint CompM5 (for now)

everything else is just whatever milspec stuff I had laying around. Total weight is a hair over 7lbs

Where did you get your gunner from? Can’t find anywhere with one in stock

 

[macky1626]

Magwell mod is the only way forward for this rifle.

 

[JasonGTA]

Where did you get your gunner from? Can’t find anywhere with one in stock

I ordered mine from RDSC before they got cleared out of barrels

 

[mjbonne]

Looks like a decent BCG and barrel are the hardest things to source - they're available but extremely expensive. Anyone have any recommendations for reliable options without breaking the bank?

 

[Tvw]

Looks like a decent BCG and barrel are the hardest things to source - they're available but extremely expensive. Anyone have any recommendations for reliable options without breaking the bank?

Aero, Faxon or Ballistic advantage, $239 - $269 and these things ain't going to let you down.. Check out RDSC

https://www.rdsc.ca/semi-auto-rifle-parts/bolt-carrier-groups.html?p=3

Barrel wise I would go with the 18.6 Ballistic Advantage Hansen Pro series $359 thru SaskatoonGunWorks. Comes with Lo Pro Gas block

https://www.saskatoongunworks.com/ballistic-advantage/556-nato-barrels/

If neither of those appeal to you I have a Shield Works MwMatch Mod2 SR556 and a S&J KAC style dimple barrel both for sale. PM for info.

 

[mjbonne]

Aero, Faxon or Ballistic advantage, $239 - $269 and these things ain't going to let you down.. Check out RDSC

https://www.rdsc.ca/semi-auto-rifle-parts/bolt-carrier-groups.html?p=3

Barrel wise I would go with the 18.6 Ballistic Advantage Hansen Pro series $359 thru SaskatoonGunWorks. Comes with Lo Pro Gas block

https://www.saskatoongunworks.com/ballistic-advantage/556-nato-barrels/

If neither of those appeal to you I have a Shield Works MwMatch Mod2 SR556 and a S&J KAC style dimple barrel both for sale. PM for info.

Thank you for the recommendations!

 

[DTM279]

Lantac, bravo company and even noveske are the to go BCGs, aero presicion should be temporary, it will break like the raven gen 1

Have you had an aero BCG break?

 

[Chadbrochill17]

Magwell mod is the only way forward for this rifle.

Which mags would you use after the mod?

 

[stumo]

 

[mjbonne]

Just put together my Crypto build with the help of this thread. Only had time to test fire a handful of rounds but it functioned well and didn't blow up in my hands so I take that as a win considering it's the first rifle I ever built. Parts list below (does not include cost of shipping, or equipment/supplies required to put together the build:

The Build

Receiver set - $999.99 (RDSC)
Rainer Arms Match Grade BCG Nitride - $279.99 (RDSC)
Rainer Arms Buffer Tube Kit 7075 Mil Spec - $109.99 (RDSC)
Strike Industries Enhanced Ultimate Dust Cover - $24.99 (RDSC)
Ballistic Advantage 18.6“ Hanson Barrel with Lo Pro Gas Block, Mid Length- $359.95 (SGW)
Aero Lower Parts Kit - $59.95 (SGW)
Aero Melanite Mid Length Gas Tube - $29.95
Aero Bird Cage Flash Hider - $18.95
Aero Crush Washer - $7.95 (I forgot to order but SGW threw it in my order for free)
TNA Anti Walk Trigger Pins - $7.93 (TNA)
Trigger Tech Duty Trigger Single Stage 3.5 lbs - $169.99 (TNA)
Magpul MOE SL Grip - $27.99 (TNA)
Super M Lok 13.5” Handguard with barrel nut - $149.07 (TNA)
Magpul SL Carbine Stock - $88.99 (TNA)
BCM Gunfighter Mod3b charging handle (non-ambi): $69.99 (Wolverine Supplies)

TOTAL (if my math is correct): $2405.67+tax

Other

Bushnell AR 1-6x LVPO with illuminated reticle $349.99 (TNA, purchased over a year ago)
Weaver Premium MSR Mount - $109.99 (Tenda)

 

[rugbydave]

Just put together my Crypto build with the help of this thread. Only had time to test fire a handful of rounds but it functioned well and didn't blow up in my hands so I take that as a win considering it's the first rifle I ever built. Parts list below (does not include cost of shipping, or equipment/supplies required to put together the build:

The Build

Receiver set - $999.99 (RDSC)
Rainer Arms Match Grade BCG Nitride - $279.99 (RDSC)
Rainer Arms Buffer Tube Kit 7075 Mil Spec - $109.99 (RDSC)
Strike Industries Enhanced Ultimate Dust Cover - $24.99 (RDSC)
Ballistic Advantage 18.6“ Hanson Barrel with Lo Pro Gas Block, Mid Length- $359.95 (SGW)
Aero Lower Parts Kit - $59.95 (SGW)
Aero Melanite Mid Length Gas Tube - $29.95
Aero Bird Cage Flash Hider - $18.95
Aero Crush Washer - $7.95 (I forgot to order but SGW threw it in my order for free)
TNA Anti Walk Trigger Pins - $7.93 (TNA)
Trigger Tech Duty Trigger Single Stage 3.5 lbs - $169.99 (TNA)
Magpul MOE SL Grip - $27.99 (TNA)
Super M Lok 13.5” Handguard with barrel nut - $149.07 (TNA)
Magpul SL Carbine Stock - $88.99 (TNA)
BCM Gunfighter Mod3b charging handle (non-ambi): $69.99 (Wolverine Supplies)

TOTAL (if my math is correct): $2405.67+tax

Other

Bushnell AR 1-6x LVPO with illuminated reticle $349.99 (TNA, purchased over a year ago)
Weaver Premium MSR Mount - $109.99 (Tenda)

Nice rig. Should be a pretty capable setup. Curious to hear how that BA barrel shoots.

 

[driftstang]

Nice builds in here. Can't wait to build mine possibly in the future. Lots of research to do first

 

[mmattockx]

Nice builds in here. Waiting for the FRT number to buy mine. Can't risk having my first AR style rifle prohibited

Hey new guy, there's an entire thread of people arguing about this already. In case you missed that, having an FRT or not has zero effect on whether a firearm ends up prohib. Maybe leave this thread for the technical side of things and not pollute it as well?

mjbonne, nice looking rifle. Let us know how it runs when you get the time to do some more shooting and have it all sorted.


Mark