Csa vz58 broken bolt

[iwi]

Where can I find a new csa vz58 bolt,for the 7.62x39.Mine broke after 700rds this sucks

 

[Plasticman]

That's a bit unusual
what year?

 

[Scamaniac]

You should have a 5 yr warranty. Check csa website with serial number for DOM. Movie Arms in Toronto is the warranty company. Hope you are covered.

 

[armilaria]

Did it 3 times first 2 with CSA before movie arms took over warrantee. Close to 1000 rounds since all is good. Movie arms knows what they are doing. Mine was over gassed I believe.

 

[223762]

Wrong size gass port maybe? Best bet would be posting a wtb add on the EE if its not under warranty.

 

[iwi]

yeah mine is a 2013 so its still covered by csa,it probably is over gassed.i just want movie arms to send me a new bolt and ill lathe the piston my self.id buy a bolt to if I could find one,i love this gun

 

[Ronsse610]

yeah mine is a 2013 so its still covered by csa,it probably is over gassed.i just want movie arms to send me a new bolt and ill lathe the piston my self.id buy a bolt to if I could find one,i love this gun

send it to movie arms, they will re port your piston and that will fix all issues, my rifle was stamped 13' and that is the problematic year,

 

[Sevensixtwo]

Yep my 2013 broke too. Pos company trying to cut corners where ever they can I imagine. Actually mine broke, then they "fixed" it, by sending back a rifle that under cycled and stove piped and stove piped so bad it broke the rear sight and then the firing pin broke. Garbage.

 

[iwi]

ok I sent my rifle to movie arms,i hope I have better luck than sevensixtwo.

 

[armilaria]

Movie arms is legit. Your rifle should have better function then factory once they determine the cause. Maybe you had a flawed bolt? Not all CSA rifles had issues. I have a friend with 1000's of rounds through his with hardly a FTF. Mine not so much but has been fairly flawless since movie arms got a hold of it. All depends on the year of manufacture. I believe 2013 was the worst year and is the same year as mine.

If you can get your hands on a spare surplus bolt I would buy it. The new manufacture ones do not look as well made as the surplus ones IMO.

 

[iwi]

That's cool Armilaria, mine had 700rds through it without a single FTF or FTE, but it did seem to really chuck the brass; pretty sure it is over-gassed. I also found that the receiver cover top rivet was loose and broken just before I sent it away. Buying a spare bolt and maybe another firing pin is definitely a good idea.

 

[sergey96]

Where can I find a new csa vz58 bolt,for the 7.62x39.Mine broke after 700rds this sucks

Contact dealer that you bought it from , if they are unable to help , DLASK Arms in Delta BC just got shipment of parts in stock contact him.
I hope it helps.