CVA Hawken - Barrel Wedges?

[Tudenom]

Is there a source for small parts like this in Canada?

I dropped a barrel wedge that holds the barreled action in the stock somewhere on the BP trail but I'm not sure where I can find a replacement. It's a CVA Hawken rifle, should be a pretty common part.

Any reccomendations?

 

[cdnrokon]

Legacy Iron Bill Sainsbury ..he has lots of small parts.. good guy to deal with

wr.sainsbury@shaw.ca
250-729-1718

 

[fingers284]

A piece of hardware steel, a hammer ,hacksaw and a file and something hard to hammer on (vise) and you could make one in an hour.

 

[wr.sainsbury]

I stock various wedges, some T/C some generic which can be re-sized. Send me a PM with the width and I will look for suitable.

 

[Tudenom]

Thanks Sainsbury (and CDNRokon)

I’ll get you some dimensions this weekend and start from there.

I might give fingers suggestion a try at a later date as well, it’s good to know if I can make some myself, who knows what the future holds!