cz 200s tank leak

[barsik]

does anyone know where I can find the special tool required to unscrew the ends on a cz200s air rifle? I'm thinking one of the O rings has failed so I want to take the tank apart to replace both of them. might also be the seal on the regulator and it is inside the tank as well. while I'm asking for info, is there a one stop shop for parts/ accessories for the AA S200/ CZ200s air rifle in Canada or is one better off going to a foreign source? thanks to any and all who respond.

 

[doctortube]

does anyone know where I can find the special tool required to unscrew the ends on a cz200s air rifle? I'm thinking one of the O rings has failed so I want to take the tank apart to replace both of them. might also be the seal on the regulator and it is inside the tank as well. while I'm asking for info, is there a one stop shop for parts/ accessories for the AA S200/ CZ200s air rifle in Canada or is one better off going to a foreign source? thanks to any and all who respond.

Huma and Altros both sell a tool that will do this job .

 

[GimpyGolden]

Can also be done with a pipe wrench and a couple bolts.
Have a look at procedure here
https://www.altaros.cz/domu/11-5089...-required_energy_with_regulator-75j_55_ft_lbs

Did you install the reg? How did you open the tank to do so or is it an external?

 

[barsik]

also be done with a pipe wrench and a couple bolts.
Have a look at procedure here
https://www.altaros.cz/domu/11-5089...-required_energy_with_regulator-75j_55_ft_lbs

Did you install the reg? How did you open the tank to do so or is it an external?

the regulator is inside the tank so I need to either make some kind of disassembly gadget or bite the bullet and get one shipped from overseas. have an idea of using an ar15 barrel nut wrench and a couple of drill bits but its going to have to wait for a bit I'm kind of busy these days.