CZ 452 Rings?

[Norm99]

I know that the 452 has a 3/8" wide dovetail groove but will I need special rings for this? I want to mount a Bushnell 3200 on the gun that I just ordered and wonder if the ordinary 1" weaver rings will work. I'm sure there' s quick answer for this and please excuse my ignorance.

 

[NickHTK]

I used BKLs for mine and they fit perfectly. Little bit confusing since my 452 has an 11mm dovetail.

 

[ebruder]

As I recall... it depends on what model of 452... I think some have 3/8" and some have the european 5/8...

EB

 

[Norm99]

It's a 452 American with the 3/8" groove. Somebody must know if the ordinary 1" weaver (or whatever) rings will fit?

 

[Pat Brennan]

They won't without some sort of bases. I used Burris steel High 22 rings, about $42 and they worked well with a Leupold 2x7.

 

[cz452shooter]

BKL 257 rings are great and fit the CZ

 

[Norm99]

Thanks very much for the replies. I need to pick up a pair of rimfire 3/8 rings. My 3200 3x9 33mm should look cool sitting on it.

 

[sealclubber]

What kind of rings would I need for my new CZ 452 Lux?

 

[skeetgunner]

What kind of rings would I need for my new CZ 452 Lux?

The Lux has an 11mm groove. Check out Eric Brooks site cz452.com and he can kit you out with some 11mm to Weaver adapters or BLK bases/rings.

 

[taffman]

Best deal going for a quality Hawke match grade ring for a CZ452, check out Illingworth's Imports Inc. from Saskatchewan. Just put a set on a new CZ 452 silhouette and they are awesome. These are hard to beat for $24.99

I have had a few pm's looking for more information on these Biatholon Match Grade mounts. They are better than the kind that tighten from both sides as there is no way to introduce any twisting torque on your scope.
Look them up on there website if your intested.

Contact information is call Harvey at 1-306-749-2421

Illingworth Imports Inc.
Box 664
Birch Hills SK S0J 0G0

 

[pharaoh2]

The CZ rifles will accept any standard .22 ring, but with a catch. They need to be high enough to clear the ocular lens when the bolt is open and particularly when trying to remove the bolt. High burris .22 rngs do the job nice. So do the Lynx rings by B-square.

 

[skeetgunner]

Depending on the shape and size of the scope objective lense, you may also need high or very high rings to clear the fixed rear site mount on the Standard and Lux barrels. Burris high QD and Sig. Zee rings on 1mm-to-Weaver bases work for me.

 

[sealclubber]

Thanks Skeetgunner, I just got my 452 Lux topped with a 3x9 Bushnell banner