CZ 455 and Leupold VX1 2-7 x 28mm What rings ?

[Brewster20]

I have a CZ 455 full stock, and I would like to mount my Leupold VX-1 2-7 X 28mm to it. Standard 11mm rimfire rings do not allow enough clearance for the bolt handle when the bolt is cycled. I have researched the web, and different articles say use medium height, and others say high height rings. Can anyone advise me as to what rings, and where in Canada they can be obtained ?
Thanks in advance.

 

[Denisb]

High Burris signature 22 rings should work. got mine at Reliable gun.

 

[kamlooky]

Rimfire Central has a chart of all the different CZ applications and what
their members did/use for model, scope and rings.
Pretty detailed.
Not sure if it was ever cut/copied/posted here?

 

[Mik123]

h t t p://www.rimfirecentral.com/forums/showthread.php?t=336921

Rimfire Central has a chart of all the different CZ applications and what
their members did/use for model, scope and rings.
Pretty detailed.
Not sure if it was ever cut/copied/posted here?

 

[calvados.boulard]

If you use JnP adapters, a set of medium Burris Sig Zee's will fit just right.

Thanks,
Cal.

 

[GD7]

I find buying dovetail rings a huge PITA, and prefer to adapt it to a Weaver rail. The only two failings of CZ rifles - the bolt throw is too high, and there is no integrated Weaver rail :/

 

[667]

I put Warne mediums on mine... Clearance is good

 

[Kody]

I have 2 bolt action CZs set up with VX1 2-7X28 Rimfire scopes. I find that Burris Rimfire/Airgun Rings (420069) work best for me as I like to mount my scopes as low as possible. Talley lows (22CZRL) work well too. No problem with bolt clearance with both ring options while using Leupold Rimfire scopes.

 

[Brewster20]

Thanks folks, a lot of options.