CZ 58 parts After Major Failure (solved)

volkov956

volkov956

CGN frequent flyer
Rating - 100%
21   0   0
Location
British Columbia
Looking around anyone know a good place to get parts for it Pins came loose while shooting a mess in the trigger mech area shredded some parts and bent others

I need the following last parts now to finish repair

43 Disconnector Spring
49 Safety Catch Holder
381 Receiver Cover Complete With/without Springs

All Places i Checked Canada = no stock and all US places i checked are no go to Canada so far
 
Last edited:
Have you tried Wolverine? They usually have a lot of small parts and they sell a spare parts kit that may have what you need. You didn't mention where you've checked so far so I don't know if that's much help.
 
Am I ever glad I sold off my CZ-858. It seems nary a week passes without another post here about yet another failure. You'd think NEA was behind their manufacture.
 
wolverine has been out of the spare kits for a while now i will check north sylva what I found odd was the safety catch holder is a cheap plastic

I couldnt find all parts during the failure since it all happened when a round went through then it all came apart as the round was leaving the rifle and of course we have gravel base fire positions.... with steel/brass all over
 
I am not bothering with warranty because of my location and would rather just purchase the parts to quicken the down period these arms are used by a group of us during our small arms training and having it down for going out to warranty is not an option
 
volkov956 said:
I am not bothering with warranty because of my location and would rather just purchase the parts to quicken the down period these arms are used by a group of us during our small arms training and having it down for going out to warranty is not an option
Click to expand...

I hear you, I bought my CSA as a backup rifle, 400 rounds in and it broke, then i went on a parts buying spree and have enough for almost 2 rifles, I'll check for you tonight and PM you,
regards
 
You dont need to buy the whole spare parts kit, Wolverine sells indivdual parts and will have what you need. Call them. I got 2 extractors from them for something like $6 shipped.

Shawn
 
7.62x39 model CSA

The Striker Spring is fine off my Reciever Cover

shawn said:
You dont need to buy the whole spare parts kit, Wolverine sells indivdual parts and will have what you need. Call them. I got 2 extractors from them for something like $6 shipped.

Shawn
Click to expand...

Checking with them again but it seems this summer parts wise they don't have much for the CSA CZ 58 858

http://www.czechpoint-usa.com/files/files/vz-58-military-manual.pdf

Main list
2x 43 Disconnector spring (Priority)
4x 411 Trigger Pin e-clip
2x 49 Saftey Catch Holder (Priority)
2x 44 Disconnector Pin
2x 41 Trigger Pin
2x 46 Sear Pin
2x 42 Disconnector
1x 45 Sear
1x 381/38 Reciever Cover Complete (Includes Parts 382,383, 384, 385, 386) (Priority)
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom