CZ 600 soft primer hits

I was suggesting maybe thats how Wolverine 'adjusted' the pin
maybe compare a primer strike from before and after the fix?
hope it works for you now
 
redneck09 said:
They might have just deep cleaned the spring, pin and firing pin channel. That’s usually the problem.
Click to expand...
I don't think that's the case. The rifle didn't have that many rounds through it before I sent it in (around 200), as well I did take the bolt apart and do a pretty deep clean before contacting them. CZ actually provides a tool to take apart the bolt with the rifle, so it was all clean, oiled and etc.
 
brandon6976 said:
I don't think that's the case. The rifle didn't have that many rounds through it before I sent it in (around 200), as well I did take the bolt apart and do a pretty deep clean before contacting them. CZ actually provides a tool to take apart the bolt with the rifle, so it was all clean, oiled and etc.
Click to expand...
Well if you did get everything out of that firing pin channel and spring then oiled it very lightly then I guess it’s likely not the issue.

From my understanding and limited experience it usually happens with brand new or close to brand new guns with factory grease. Or in the case where someone uses too much oil in the wrong places.

Too bad we don’t know what wolverine did so we could all learn from it.
 
redneck09 said:
Well if you did get everything out of that firing pin channel and spring then oiled it very lightly then I guess it’s likely not the issue.

From my understanding and limited experience it usually happens with brand new or close to brand new guns with factory grease. Or in the case where someone uses too much oil in the wrong places.

Too bad we don’t know what wolverine did so we could all learn from it.
Click to expand...
Fully agree. I was hopeful that when I took it apart it would a simple deep cleaning that would fix it. Below is a picture that shows brass that didn't go off on the left and on the right is one of the cases that was fired when I got it back. It's not the best (sorry just cell phone pic) but it's pretty clear even with it not being 100% in focus that the strike on the right is much better. I agree that it's a shame Wolverine can't just say what they did (I suspect it's a new spring or firing pin all together).
RJAKh4s.png

Vz0VvfK.png


edit: added a second picture that's a bit more clear.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom