CZ-75 10/33 Magazine Issues

[Crazy Chaingun]

Hello all,

I recently bought a 10/33 magazine for my CZ off the EE, but I'm having a little trouble with it.

First, I couldn't get it to fit in the gun because the rivet on the side was too wide to fit the magwell.
I've almost completely filed down the rivet, but it's still catching and bending when I try to eject the magazine.
What would be an alternative way to pin this magazine to ten rounds, so that it does't interfere with the magwell?

Also, when this magazine is fully seated, the trigger does not reset when dry-firing.
Has anyone had this problem before?

I'll try post pictures of the magazine later on today.
If anyone has experience with these things I would love to hear about it.

Thanks,

C.C.

 

[09outlander]

Use a standard 10 round mag, I heard they work pretty well.

 

[Slavex]

the factory 10 round mags suck balls
as for the 33, you need to find a way other than a rivet to limit it. and don't take the rivet out prior to doing that, because that's bad.

 

[facemans]

i don't know if it can be done on those magazines but typically the other way to limit a magazines capacity is to weld a post to the inside but that is difficult to do and usually would require a professional to get it domne properly