CZ 858 foldable stock

[edyshok]

My foldable stock on my CZ 858 is wobbling when unfolded, anybody knows how to fix that?

 

[Curtton]

My foldable stock on my CZ 858 is wobbling when unfolded, anybody knows how to fix that?

first make sure the screw at the bottom of the hinge is tighten and the hinge/locking pin is recessed into the plate by 1-2mm.

secondly , need more info , is it new or used ? i assume its wobbling side to side and not up and down . if used then it may just be usual wear so replace the locking/hinge pin and spring.

if its new then maybe someone filed the bar front end abit too much , the bar front end is what touches the plate when unfolded. in that case all you can do is shim or weld abit to the bar front end.

 

[JBD]

Also you could check to make sure that the screw attaching it to the reciever is tight. This could cause a wobble.

 

[edyshok]

first make sure the screw at the bottom of the hinge is tighten and the hinge/locking pin is recessed into the plate by 1-2mm.

secondly , need more info , is it new or used ? i assume its wobbling side to side and not up and down . if used then it may just be usual wear so replace the locking/hinge pin and spring.

if its new then maybe someone filed the bar front end abit too much , the bar front end is what touches the plate when unfolded. in that case all you can do is shim or weld abit to the bar front end.

It's lightly used, wobbling side to side, where do I get locking/hinge pin?
Yes, when unfolded the front end of the bar does not firmly touches the base plate, that what is causing the wobbling.
The screw is tight.

 

[crazy_arctic_hero]

Sorry if this is alittle off topic but just one random question. What kind of stock are you using and whats the overall length of the rifle when folded?

 

[Norseman]

It's lightly used, wobbling side to side, where do I get locking/hinge pin?
Yes, when unfolded the front end of the bar does not firmly touches the base plate, that what is causing the wobbling.
The screw is tight.

I have some

 

[Curtton]

I have some

i knew you would . do you have spare folder attaching main screw?

 

[Norseman]

i knew you would . do you have spare folder attaching main screw?

Sold out, I did have 6 Im down to the nitty gritty, this stuff dried up fast. Even in the U.S. apparently they are having a hard time getting VZ58 parts kits , Centerfire systems is completely out too.

 

[Curtton]

Sold out, I did have 6 Im down to the nitty gritty, this stuff dried up fast. Even in the U.S. apparently they are having a hard time getting VZ58 parts kits , Centerfire systems is completely out too.

it was good while it lasted . thanks for bringing them in .

 

[Norseman]

it was good while it lasted . thanks for bringing them in .

Your welcome