cz 858 loose ejector

broncoo said:
about 5k rnds my ejector has started to loosen anybody else have this happen?

i already staked it back into place
Click to expand...
Sounds like either the detent or the spring on the ejector has broken. Strip the bolt. If so PM me with your address and I will send it to you or contact Wolfgang @ Wolverine for a parts kit.
 
do you mean the spring loaded casing grabber on the bolt? or the piece of metal at the bottom of the receiver that the casing hits as its pulled out the chamber?

i think the spring loaded deal is called the extractor... and the metal bit it hits on recoil is the ejector, no?
 
Satain said:
Sounds like either the detent or the spring on the ejector has broken. Strip the bolt. If so PM me with your address and I will send it to you or contact Wolfgang @ Wolverine for a parts kit.
Click to expand...

Ejector not extractor

Fixed it when I noticed it as for parts I think i have enough to build a few rifles if the nees arose
;)
 
nice of him to offer :) hey broncoo i am still going to call you soon to get the bolt carrier tabbed.
 
broncoo said:
Ejector not extractor

Fixed it when I noticed it as for parts I think i have enough to build a few rifles if the nees arose
;)
Click to expand...
My bad.
Ya noticed the same thing then after a while it took a chunk off the bottom of my bolt and it got mangeled in the action. Dropped a beed of tig on the replacement part and she was good to go ;)
 
You must log in or register to reply here.
Back
Top Bottom