Aprilia Man
CGN Ultra frequent flyer
- Location
- Canadian "WET" Coast (Raincouver)
CZ Bren 2 MS - Restricted FRT
- Thread starter Aprilia Man
- Start date
I have handled the Bren 2 a few times at various trade shows. The trade show models are well built and have very nice trigger. However, some of the accuracy reports and extraction issues of the production runs on the interweb are somewhat concerning. Maybe it is not a bad idea to let the US people beta it and we can wait a bit so the newer production runs imported by the CDN distributors in 2021 will resolve some of these issues.
CZ needs to make longer 10" handguards for the Bren 2 and make them standard - too much dicking around with aftermarket parts and weird contraptions is creating problems. The LOP of the stock is also a bit on the long side so we need an AR stock adaptor to shorten down the LOP.
I do want to see the 308 version available - which i think could be exciting.
CZ needs to make longer 10" handguards for the Bren 2 and make them standard - too much dicking around with aftermarket parts and weird contraptions is creating problems. The LOP of the stock is also a bit on the long side so we need an AR stock adaptor to shorten down the LOP.
I do want to see the 308 version available - which i think could be exciting.
mebiuspower
CGN Ultra frequent flyer
- Location
- Morontario
The LOP from the trigger to the end of the pad with the stock fully collapsed is less than 12".
I hope this is the one that gets imported, then it will be a rifle as opposed to the US pistol version.
Thats IF the FRT is actually real. Disappeared off the FRT table and can't be found except the prohib Bren 2 listing
Uh Oh..... I am sensing some Ottawa F#ckery at play here.....
