CZ rimfire parts

[enen]

HI
I just got a new to me Brno Mod 4 and working through some spent round ejection issues
Any company sell CZ parts in Canada or at least ship to a canadian address?
Thank you

 

[terBC]

yodave has strikers and trigger springs but I don't think he has anything for extractors.

 

[45CAT]

Wolverine is the warranty shop for CZ in Canada, give them a call

 

[kamlooky]

Be curious to see how this pans out.
Keep up enlighted with your outcome.

 

[grauhanen]

If you haven't already done so, disassemble the bolt to clean everything out. Many Model 4's are 60 years old. They are good shooters but need a good cleaning from time to time.

 

[DeadeyeDave]

Check the "extractors" on the bolt. The right hand one is the actual extractor and should have a hooked shape. The left hand one is the holder and should have more of a triangular shape which allows it to let go when the spent case contacts the little "nub" on the base plate under the bolt.
I had a #2 with the same problem and found that a previous owner had installed a right hand extractor on the left side which caused the case to hang up.
At the time I ordered a replacement from Western Gun Parts but found it didn't fit I eventually got the correct one from Denny in California but sadly he is out of business now.

 

[niacbob]

I purchased a well used dirty model 4 that had extraction issues. Cleaned everything and it still had extraction issues. Removed the extractor and holder and the problem became obvious. The spring clip had no “spring” left in it. Replaced the spring and the problem was resolved. That was 8 years ago and she still is problem free today. Your problem may be different that this was mine. Good luck.