CZ Shadow complete takedown.

skookumchuck

skookumchuck

Regular
Rating - 100%
37   0   0
Location
Hope B.C.
I'm loving my new CZ and want to learn how to compleatly disassemble it. What would be a good resource to learn this? I'm a little nervous about just jumping in with the schematic provided with the pistol.
Thanks in advance.
 
(((Echo))) said:
Go crazy.

CZ Shadow strip and trigger job

(E) :cool:
Click to expand...

Good link. I'd like to add that nobody should mess with their sear nose or hammer hooks unless they really know what they are doing. The potential for creating a dangerous situation is quite high. If you DO know what you're doing, then the above thread is a great way to see how you should change the angles.

Here's a link to trigger work that doesn't touch the sear or hammer hooks, relying just on polishing:

http://www.czfirearms.us/index.php?PHPSESSID=21544e778f7293aa577d9155c49f5374&topic=42644.0
 
Note that to restore the staking on the trigger pin that you'll need a special punch or need to make one up. You want it to be rounded over shape with a nose radius that pretty much matches a 1/8 diameter bearing ball.

The other spot to really watch is the small little spring and retention piece for the left side safety. I'd suggest you observe the orientation carefully before you take it apart and then do the actual removal of the little piece and spring inside of a clear plastic bag. Otherwise it's too easy for those pieces to try to leap for freedom.
 
Good call, BCRider. You can also get a solid trigger pivot pin and install it instead of the roll pin.

Roll pins. Don't like em.
 
Come to Skills and Drills in Abby we regularly detail strip guns after class, including Shadows
 
You must log in or register to reply here.
Back
Top Bottom