CZ shadow rear sight pusher

[Beater]

looking for a rear site pusher that will work with the shadow. would really like to buy from a site sponsor, not having much luck however. anyone have any ideas?

 

[Markus]

I think dlask arms carries one. They are a sight sponsor

 

[Beater]

I do not or did not see it on there site

 

[Lead hammer]

I started to make one from a C -clamp. But the hole I drilled was in the wrong spot, gave up and used a brass punch. I cried a bit after the first two hits, then I got over it.

 

[Markus]

My apologies. I'm positive that is where I bought mine a few months ago.

 

[MET]

Here are 2 options,

https://www.gotenda.com/shop/accessories/gun-maintenance-tools/universal-pistol-rear-sight-tool/

https://www.selectshootingsupplies.com/products/armorer-s-handgun-sight-tool

 

[Beater]

thanks MET

 

[SRV6513]

I have tried a bunch over the years. Some worked ok, some were complete garbage. Anyone who has fought with Springfield XD pistol sights will know what a ##### that job can be! The one I have been using for the last few years is a little more money then some, but you can use this one with the slide on or off the gun, front or rear sight. srcgunworks.com

 

[Beater]

wow that one looks extra heavy duty I like the wheeler to , but they lotsa coin gona try the Nc starr one. if its not tough enough then ill step up

 

[SRV6513]

Yes, very well built, plus you can order different pushers for whatever handgun you have or may have later. They also have a wide base that you can put in a vise, which is nice as well

 

[Over_Kill]

I bought this one, expensive, yes, but well worth it.

https://www.thetruthaboutguns.com/2014/07/josh-santomieri/maryland-gun-works-mgw-sight-pro-tool/

 

[smiley1]

I saved money and used a brass punch and a hammer to push it, took a couple tries but got it.

 

[Beater]

normally I use a brass drift and hammer. don't want to ding up the shadow to badly