CZ Shadow SP-01 trigger kit?

Wardze

Wardze

New member
EE Expired
Rating - 100%
1   0   0
Location
New Brunswick
Hey everyone this is one of my first posts in here, Just looking to see where everyone is getting there CZ Shadow Sp-01 trigger springs and longer firing pins at? Just got my SP-01 the other day and iam getting it rug up for IPSC. I was looking into the CGW trigger kit but the 39$ part after shipping and boarder fees and handling fees from the company's supplier was going to be 109$ american. Just looking for some help seeing what all you guys are doing thanks alot!
 
Reliable Gun, Dlask Arms, Select Shooting Supplies all carry the various FP and spring upgrades for CZ SP-01 and Shadow 2.

Wolverine has the SP-01 factory parts kit for spares of everything (not upgraded springs).

I’ve ordered the various ones for my Shadow 2. 11# recoil and 13# main working nicely. I have the extended FP and reduced spring but have not put it in yet. Not sure if SP-01 weights are same, but afaik most of the parts are interchangeable except for anything that is related to width of body like mag release, slide stop are wider on Shadow 2.
 
Thanks! I found the 11lbs spring and the 13lbs spring I wanted, still some trouble on the existended firing pin and reduced spring if anyone could paste a link that would be awesome ��
 
snooker said:
I truly think you should shoot it as is, at least for a season...........
Click to expand...
The 13lb mainspring will still leave him with a DA pull between 7-8lbs. He can dryfire that to build up his fundamentals. More of a workout than many striker fired guns.

Ideally the recoil spring will be paired with his ammo. Extended FP probably won't be needed with this setup. I only needed it using Dominion primers.
 
extended firing pins are unnecessary in my opinion. run a super light (Shadowmate) firing pin spring and you won't have any issues.
 
Tried a light 11lb mainspring today. Getting all kinds of light strikes with CCI primers.....and I’m running an extended firing pin with Rami FP spring.
 
the Shadowmate firing pin spring is lighter than the Rami, it's the lightest one Robin has and is lighter than any of the ones anyone else sells. I run either a 10lb hammer spring or sometimes an 8.5lb hammer spring with zero issues with CCI, Federal, S&B and very few issues with Dominion primers. No extended firing pin
If you're getting issues with CCI, I'd see if you can seat them deeper.
 
Just tried the slide from my backup Shadow with the same setup. Running fine. I’ll order some FP springs from Robin. I have the Hornady press. Not sure what I can do about the primer depth. Need to get a lovely lady I know to grab some Fed primers from some dude who is hoarding his. Lol!
 
You must log in or register to reply here.
Back
Top Bottom