Cz trigger kit

[redneckchris]

I have a had a few cz 452 rifles and have done triggers in them with Eric brooks and yo Dave kits and was wondering if I could use the extra shim tubes and springs in a 455 are the trigger group assemblies the same? Also what is the correct torque for the stock mounting bolts. This info will be very helpful to me. Thanks in advance
Red

 

[ronnie01]

Yup 455 uses same springs and shim tubes. Why not get a dip adjustable sear. They are sweet .

R

 

[hometownhero]

Yodave lists his kits for 452/3/5

 

[Pocisk]

Also what is the correct torque for the stock mounting bolts. This info will be very helpful to me. Thanks in advance
Red

I'm going by memory but I believe the concensus is around 22 inch poumds. I've heard some go as low as 18. Every rifle has its own sweet spot so you'll have to do some experimenting. I guess the best answer is somewhere between 18 and 25.

 

[hometownhero]

In the cz manual it says to tighten the stock screws to 6nm which is 53 inch pounds. I do not recommend that at all. I use 20inch pounds and works good

 

[ronnie01]

The cz manual is a typo it has been discussed at length on rim fire central.

R

 

[hometownhero]

Was the one that came with my 455. The one for my 452 doesn't mention tq specs. All I know is it seemed really high lol