CZ75 SP01 Shadow 11.5lb hammer spring

lol, I've also weakened springs in the past in a similar manner. Old skool method. :p

Edit: I figureed I had nothing to lose so I snipped a 1/2 coil off the supposedly 12lb hammer spring I have installed. Now it breaks at around 8.5lbs in DA and just around 3lb in SA. I'll pop some CCI primers this weekend and see if I get any failures. :)[/QUOTE]

Hi Trinimon,
Nice reasonning....old school style also.
 
lol, I've also weakened springs in the past in a similar manner. Old skool method. :p

Edit: I figureed I had nothing to lose so I snipped a 1/2 coil off the supposedly 12lb hammer spring I have installed. Now it breaks at around 8.5lbs in DA and just around 3lb in SA. I'll pop some CCI primers this weekend and see if I get any failures. :)[/QUOTE]

Hi Trinimon,
Nice reasonning....old school style also.
 
Trinimon said:
Yup. I've already hit Slavex up but also ordered a couple more different weight springs. Gonna have mainsprings coming out of my yin-yang very shortly. I'll have to start painting them so I don't mix 'em all up. lol



lol, I've also weakened springs in the past in a similar manner. Old skool method. :p

Edit: I figureed I had nothing to lose so I snipped a 1/2 coil off the supposedly 12lb hammer spring I have installed. Now it breaks at around 8.5lbs in DA and just around 3lb in SA. I'll pop some CCI primers this weekend and see if I get any failures. :)
Click to expand...

Hi Trinimon,
Old school method too.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom