cz858 stock bolt

[iloveak47]

i am trying to remove the folder on my cz858 and the bolt refuses to cooperate. i was just wondering if it a regular bolt and i need to turn counter-clockwise to unscrew it?

 

[Sardaukar]

Nope, it's just stuck there really freaking well.

 

[JAGDMORDER]

This has been discussed many times in the interforums. Im sure there is a link somewhere. The bolt has a wide slot, which will cause ordinary drivers to slip out . A tire iron ground down with some brute force, with the rifle clamped in a vise oughta do er. If it is a b!tch then cut the fvcking stock off and you can git at er with vise grips. Hope this helps.

 

[iloveak47]

evemn with the impact driver it will not move, i tried every idea i found on the forum, i think my next move will be to cut it, i don't think i will put the folder on again anyway.

 

[Dmitri]

NOOOOO...dont cut...

take a biggest,longest flat screw driver... and keep at it untill it comes off...
the head of the driver has to be as wide as the bolt... you can even try using a "tire iron"
or what ever its called. oh and if you not going to use the folder.. is there a chance you could spare a bolt...? i lost mine.. and really need it... will pay for shipping +..

Good luck

 

[Dmitri]

another tip.. :

While sitting down, put the gun between your legs(knees) muzzle pointing down, this way you can push on the driver harder. Just please dont stab your balls while doing it..

 

[iloveak47]

sorry dmitri it's too late. believe me i tried everything and even made a custom tool that was the exact size of the bolt's slot and with the impact driver it would not move. i tried heating it with a torch, degreaser etc,

 

[JAGDMORDER]

NOOOOO...dont cut...

take a biggest,longest flat screw driver... and keep at it untill it comes off...
the head of the driver has to be as wide as the bolt... you can even try using a "tire iron"
or what ever its called. oh and if you not going to use the folder.. is there a chance you could spare a bolt...? i lost mine.. and really need it... will pay for shipping +..

Good luck

If the bolt is the same as a regular non-folding stock, then I may have an extra one if you need it. I will check tonight when I get home from work.

 

[Stevo]

If the bolt is the same as a regular non-folding stock, then I may have an extra one if you need it. I will check tonight when I get home from work.

The bolts are different for the fixed and folding stocks.

 

[JAGDMORDER]

The bolts are different for the fixed and folding stocks.

Thanks. Saves me from going through a pile of gunparts.

 

[Sardaukar]

NOOOOO...dont cut...

take a biggest,longest flat screw driver... and keep at it untill it comes off...
the head of the driver has to be as wide as the bolt... you can even try using a "tire iron"
or what ever its called. oh and if you not going to use the folder.. is there a chance you could spare a bolt...? i lost mine.. and really need it... will pay for shipping +..

Good luck

Contact the retailers for the VZ, like Wolverine, those guys handle tons of them, there's a good chance they have parts laying around.