D.A. Grizzly feeding issue

[Artie Fufkin]

Was at the range today, second time shooting D.A. Grizzly. Its the first model offered with bead sight.

EVERY shot would not feed. Ammo was Winchester 1 oz. rifled slugs. Yes, shoulder hurts today! Tried cycling various different ammo and all had same feeding problem.

The round was getting hung up on bolt release every time. Guess I have to get it checked out by someone.
Any thoughts/advice appreciated.
Thanks.

Artie Fufkin

 

[Canuck223]

Sorry, do you mean you had a failure to clear the spent shell?

I had a similar problem with my Norinco, and the problem was a tincan thin ejector and poor ejector spring. Arwen Ace fit a factory Remington in it's place.

 

[Artie Fufkin]

Sorry, do you mean you had a failure to clear the spent shell?

I had a similar problem with my Norinco, and the problem was a tincan thin ejector and poor ejector spring. Arwen Ace fit a factory Remington in it's place.

No no, it wouldn't chamber. Shell would get stuck at the bottom, basically a shell depth below the chamber. Shell rim edge would get stuck on the bolt release every time and not go up to chamber. It would essentially get stuck and sit against the carrier assembly. Hopefully that made sense.

Artie Fufkin

 

[4WDarren]

I had some similar problems with my Grizz, feeding and ejecting (ejecting was the main problem). I bought mine recently, so I just sent it back to CanAm for them to take a look.