So had the gun at the range for the first time. Went through 2 mags no problem then on the 33rd or so round the case gets stuck in the chamber. Knock it out and reload......4 rounds later another gets stuck. Finally after pounding about 5 cases out I called it a day. Not sure if it's an issue with the gun or if the laquer on the cases is melting in the heated barrel and getting them stuck in. And if the laquer is the problem how do you get it off the ammo?
DA762 cases stop ejecting
- Thread starter sookie_69
- Start date
Hey
pick your self up some copper washed ammo and try that, as stated above the lacquer is probably the cause.
had similar problem but was way worse, my casings got stuck in the gun and needed a sks cleaning rod to loosen them out.
if it still happens then atleast you know its not the ammo
Glenn
pick your self up some copper washed ammo and try that, as stated above the lacquer is probably the cause.
had similar problem but was way worse, my casings got stuck in the gun and needed a sks cleaning rod to loosen them out.
if it still happens then atleast you know its not the ammo
Glenn
