DD AR15 Lite Rail 12.0 FSP Installation

It's not Lite 12.0 FSP but Weapon Evolution has the install guide and review for the Daniel Defense Lite 7.0.

ht tp://www.weaponevolution.com/forum/showthread.php?1-Daniel-Defense-Lite-Rail-install-guide-and-pictorial-review
 
Cool, I've seen that one. I don't have the instructions because my rail is still on the way. I'm just concerned about how it is constructed. Will I have to put on the one piece rail and FSB at the same time? I suppose the taper pins get hammered through those holes?
 
1) Make sure you get the DD Wrench for it (IIRC its needed for BOTH the Lite & Omega rails)...

2) IIRC, You will just slip the gas tube, FSP, and rail system on all together... It's not hard and you'll see how to do it once you get the rail... And IIRC on the Lite rails you can get to the taper pins with the rail installed.
 
NorCalDustin said:
1) Make sure you get the DD Wrench for it (IIRC its needed for BOTH the Lite & Omega rails)...

2) IIRC, You will just slip the gas tube, FSP, and rail system on all together... It's not hard and you'll see how to do it once you get the rail... And IIRC on the Lite rails you can get to the taper pins with the rail installed.
Click to expand...

All correct. Except the Omega X uses the wrench, not the Omega. The RIS II does as well.
 
You must log in or register to reply here.
Back
Top Bottom