Derya thread? Derya thread.

Picked one up last year, should have waited LOL. But happy enough with it, haven't used it a whole lot (some 3 gun events, and just for range fun) but it's worked every time and hasn't missed a beat of anything I've fed it, including all types below and a few more besides. Yes a GOOD cleaning before first use is mandatory as mine was really gunked up from the factory.

DSC09616_zpswenwtguq.jpg

DSC09764_zpsegcqzhid.jpg

image_zpsgcg44tle.jpg
 
So is anyone carrying extra mags for these yet? I ordered one today from ammosource as well. Was going to buy one locally but they wanted $650, then went ahead to say that it only came with the 2rd mag and I'd have to pay for the 5rd one separately, I was disgusted. Every offer I've seen started with 3 mags, a case, sling and choke tubes. That changed and I'm ok with that, but charging extra for something that it naturally came with? I was not impressed and will never deal with that store again.
 
urbaneddy said:
So is anyone carrying extra mags for these yet? I ordered one today from ammosource as well. Was going to buy one locally but they wanted $650, then went ahead to say that it only came with the 2rd mag and I'd have to pay for the 5rd one separately, I was disgusted. Every offer I've seen started with 3 mags, a case, sling and choke tubes. That changed and I'm ok with that, but charging extra for something that it naturally came with? I was not impressed and will never deal with that store again.
Click to expand...

$650 is crazy. I bought mine from SFRC for $100 less, and it had a 2 round and a 5 round mag
 
BillD said:
Picked one up last year, should have waited LOL. But happy enough with it, haven't used it a whole lot (some 3 gun events, and just for range fun) but it's worked every time and hasn't missed a beat of anything I've fed it, including all types below and a few more besides. Yes a GOOD cleaning before first use is mandatory as mine was really gunked up from the factory.

DSC09616_zpswenwtguq.jpg

DSC09764_zpsegcqzhid.jpg

image_zpsgcg44tle.jpg
Click to expand...

How did you mount the one-point on there?
 
so far i have about 600 rounds through mine, i got it last month and i love the thing,

as far as mag issues, well just don't pound it in there and its fine. the mag drops free with the press of a button and it goes into the rifle just as easy, 2 fingers slight push and it clicks in place, sure you can beat the mag and rifle all around like your some tough guy GI-joe, but there is no need, just pop the mag in a go. With a full mag, the weight of the mag will click it self in place with the rifle upside down, that's how little force is needed to seat the mag, DONT beat on it. In the first day of having it i jammed the mag into the bolt, and then thought to play with it and see how little force is needed to seat the mag, you will be surprised

and for feed issues i hear about, well with the stupid door breacher choke and the most open choke that comes with the rifle will give you issues, the first 10 shots i fired through it when i got it were the blue challenger target loads, all 10 didn't eject or stove piped, so i thought "how to increase pressure while using the same ammo" and then thought to change to the most closed choke that came with the rifle, since then i had not one issue and ill list what i have fired so far thought it,

after the first 10 challengers messed up and i changed the choke there has been NOT ONE cycle issue
ive fired these issue free-
240 2 3/4 challenger target loads No 7.5
100 2 3/4 federal "field and range" No 8
100 2 3/4 winchester super x lowbrass No 4
50 2 5/8 Sellier and bellot 00 buck shot
about 50 random high and low brass from a old box of random 12g shells 2.75 and 3" [mostly federal no5 classic duck lead loads"

ive loaded mixed mags that were stacked like, No8 target, No4 lowbrass, 00 buck shot, No5 highbrass, No7.5 target, [every shell was a different color]and emptied the mag no issues, recoil even felt the same in them all

so really i have 550 accounted for but when i but when i brought it to a friends we used his ammo and i believe it was 2 boxes

i have yet to clean this rifle, i wiped out the chamber before the first shot and that's it, since changing the choke, i cant find ammo that doesn't run flawless, and the mag issue is gone now that i know how much force is actually needed to seat it,

i shall go clean it now though, its brand new and its not a 100 year old rifle like everything else i own, ill keep it new lol
 
Last edited:
Only mag issue I had was with the origional 2 round'er - some excess plastic flashing kept the follower from moving freely, trimmed it off and cured that little issue. It's been flawless otherwise.
 
Hey guys, just picked up a used Derya Mk10 - I think Gen 2. Put a few slugs through it at the range and brought it home to clean it but found the metal ring on the gas piston had been shoved up to the bottom of it and I expect that needs to be replaced, yay. I also found one broken o-ring in the top part of the gas chamber attached to the barrel. There is two grooves and I expect there should be two o-rings. Does anyone know for sure if there should be two and what size of O-rings these are as I checked one gun shop in Calgary and told they don't have any o-rings?
 
c846627 said:
Hey guys, just picked up a used Derya Mk10 - I think Gen 2. Put a few slugs through it at the range and brought it home to clean it but found the metal ring on the gas piston had been shoved up to the bottom of it and I expect that needs to be replaced, yay. I also found one broken o-ring in the top part of the gas chamber attached to the barrel. There is two grooves and I expect there should be two o-rings. Does anyone know for sure if there should be two and what size of O-rings these are as I checked one gun shop in Calgary and told they don't have any o-rings?
Click to expand...

Try talking to Tony from T&T Arms. He should able to hook you up with the information you need
 
You must log in or register to reply here.
Back
Top Bottom