Diamondhead USA AR15 Handguards Are Here!

WanstallsOnline

WanstallsOnline

Expried Business Member
Location
Maple Ridge BC
We're happy to announce that our first shipment of Diamondhead USA tactical handguards has arrived! We were stuck at the border for a little while with this amidst US government delays, but it has landed now and everything looks fantastic. You may have seen these forearms on the internet and wondered what the triangular style handguard was... well, it's Diamondhead USA's VRS-T forearm and we're proud to have these in the building! If you have an AR15 in need of modernization, we have the upgrade you're looking for -- nothing at your local range looks like these.



VRS-T Handguards
Diamondhead’s innovative V-RS™ “T” Free Floating Handguards offer an uninterrupted rail extension and handguard in perfect alignment with the host weapon’s flat top receiver. The “T” rail replaces the factory delta ring and barrel nut. The V-RS™ Free Floating Handguard System provides the same flexibility of use as Diamondhead’s renowned V-RS™ Drop-In System. Simply attach rails and bumpers to the V-RS™ for the required rail-mounted accessories.


Diamondhead USA VRS T Handguard 10.25"


CLICK HERE



Diamondhead USA VRS T Handguard 13.5"


CLICK HERE



Diamondhead USA VRS T Handguard 15"


CLICK HERE




VRS-X Handguards
Diamondhead’s innovative VRS™ “X” Free Floating Handguards offer an uninterrupted rail extension and handguard in perfect alignment with the host weapon’s flat top receiver. The “X” rail replaces the factory delta ring and barrel nut. The VRS™ Free Floating Handguard System provides the same flexibility of use as Diamondhead’s renowned VRS™ Drop-In System. Simply attach rails and bumpers to the VRS™ for the required rail-mounted accessories.


Diamondhead USA VRS X Handguard 10.25"


CLICK HERE



Diamondhead USA VRS X Handguard 13.5"


CLICK HERE




VRS-X Accessories
Diamondhead USA's popular VRS-T and VRS-X "Versa-Base" handguard systems allow the user to configure them for the mission at hand with removable rail sections -- place your accessories where you need them most, save weight, reduce bulk.


Diamondhead USA VRS Long Rail Kit


CLICK HERE



Diamondhead USA VRS Short Rail Kit


CLICK HERE




You can get these now at WanstallsOnline -- they're in stock, in our building, ready to ship coast to coast on our flat rate $10 shipping. Upgrade your carbine today!

Cheers,
Daniel
 
Sonnnofa#####. I just ordered the 10.25 from one shot. I wanted the 13.5 but it was out of stock. If I would have waited 2 hours I could have ordered the 13.5 from you.
 
Excellent have a 10.5 t already and looking to get a 13.25 T.

Quick question. Do you guys have any low profile gas blocks that work for a bull barrel and will fit in these handguards? I might have found one from the States but would prefer to buy one guaranteed to work. As soon as I get that sorted out I'll be buying another of these handguards.
 
Curious why they require the Front sight to be replaced with a low profile gas block? Couldn't the 10.25" be used on 14.5" and longer barrels and the front sight not interfere with the rail?
 
This is a very easy to install system, the special barrel nut can be fasten on using a standard wrench(adjustable) and finnishing it with crows foot and torque wrench. It's a normal but big 6 sided nut type fastener.
you could use a 10.25" model with any kind of barrel with fixed sight it would have to use a rifle lenght gas system and still have to remove the taper pins + front sight, that would look very ugly...but it would work.
if your aiming for a real ugly look thats the way to go.
not all rail work on those....screw hole spacing is propre to Diamondhead......i have learn that the expensive way.
it is one of the best fitting and ergonomic for my hand, finnish is top notch.
down side is the weight,it is a bit on the heavy side.....but very solid, you cant go 4X4 ing with an F1.
happy to see these will sold at a few places in Canada.
 
Last edited:
batwing said:
This is a very easy to put on system, the special barrel nut can be put on using a standard wrench(adjustable) and finnishing it with crows foot and torque wrench. It's a normal but big 6 sided nut type fastener.
you could use a 10.25" model with any kind of barrel with fixed sight it would have to use a rifle lenght gas system and still have to remove the taper pins + front sight, that would look very ugly...but it would work.
if your aiming for a real ugly look thats the way to go.
not all rail work on those....screw hole spacing is propre to Diamondhead......i have learn that the expensive way.
it is one of the best fitting and ergonomic for my hand, finnish is top notch.
down side is the weight,it is a bit on the heavy side.....but very solid, you cant go 4X4 ing with an F1.
happy to see these will sold at a few places in Canada.
Click to expand...

Dont think it would be ugly at all and the fixed sight is more accurate for iron sight shooting than a rail mounted front sight. Good to know it can be done by removal and reinstallation again
 
I think he means it would be ugly because on a rifle length gas system there would be a gap between the sight post and the rail...which I have to agree...would look stupid.
 
DasJager said:
I think he means it would be ugly because on a rifle length gas system there would be a gap between the sight post and the rail...which I have to agree...would look stupid.
Click to expand...

Yep, and I can confirm that the 10.25" completely covers the gas block on a mid-length gas system, the shoulder of the barrel the gas system goes onto is ~3" further forwards so it would be 2 inches further out than the handguard.
 
wow I'm gonna be the guy that revives a necro thread hahaha

can you folks still bring in Diamonhead handguards?
I'm specifically looking the 15" VRS T-308H (High*) KeyMod with dmps barrel nut

I bet you sell a pile of them to Stag-10 owners should you be able to bring them in.
 
You must log in or register to reply here.
Back
Top Bottom