Dillon .223 Die Question

N

nmclella

New member
Rating - 100%
45   0   0
Location
New Brunswick
Good afternoon everyone,

Quick question for those who might be able to help me out.

Recently purchased a used .223 Dillon 650 kit.

The sizing/decapping die came with no decapping pin (the entire screw in assembly was missing). Contacted the seller and he said he was wondering why he had an extra and sent it right along. No problem.

Get it here and put everything together. I now believe that the ?sizing insert? is missing as well. Should have seen it before, but I am new to the reloading game. I emailed the seller the following pic and asked about it. He said he has no idea what I am talking about and that everything should be there complete. There is no way this is complete as it needs to size the bullet.

2lm9w8p.jpg


2vtz7fa.jpg


Please tell me that I am not crazy and that this is incomplete.

I appreciate your time and help.


Thanks,

Nate
 
Check your crimp and seating die, make sure you don't have them mixed up. They should say respectively, full-length size dies, bullet seating dies, taper crimp die. If you can't get it sorted out, just call Dillon directly and they will give you some further guidance.

BSB
 
Thank you for the replies.

Further photos for reference.

.223 kit that was sent above, 44 mag dillon dies below for reference.

Order: sizing, seating, crimping.

n6t6on.jpg


Close ups of each die. The die that is supposed to be the sizing/decapping die has no writing on it.

k0occ5.jpg


zo6xja.jpg


oknyue.jpg


Thank you for your time.

Nate
 
You must log in or register to reply here.
Back
Top Bottom