Dillon accessories

[Boomer686]

Seen these on ebay....Any of you guys try these accessory add-on powder adjustment knobs? They seem like a good idea and are reasonably priced.

Plastic model:

http://cgi.ebay.ca/LARGE-POWDER-ADJ...215|66:2|65:12|39:1|240:1318#ebayphotohosting

http://cgi.ebay.ca/POWDER-ADJUST-KN...215|66:2|65:12|39:1|240:1318#ebayphotohosting

Metal version:

http://cgi.ebay.ca/Dillon-Powder-Me...215|66:2|65:12|39:1|240:1318#ebayphotohosting

Regards,

 

[kombayotch]

If you're going to spend the money, this is the one to get:

http://www.uniquetek.com/site/696296/product/T1231

 

[Boomer686]

Very nice... never found that one in my quick search.

Any other makers / variants ?

Regards,

 

[kombayotch]

Nothing even close... its the best option out there.

 

[waynesixgun]

I have often wondered why Dillon doesn't carry those..

 

[BC_Guy]

I have that uniquetek micrometer on my 650 -it's awesome.

 

[back40sniper]

another vote for uniqueteck, bought one for 650, now have a couple

 

[orgrabbit]

I though this is the coolest thing for a Dillon( uniqueteck). I bought one A-sap !!

 

[Canuck44]

You can buy bolt head protectors from hardware stores that do the same thing. I bought mine stateside for a nickel each IIRC.

Take Care

Bob

 

[tgt40]

Again for the Unique tek. Check out the lights theyv'e got for the 650 too. They're really good!

 

[scout]

'nuther plug for uniquetek ... on my Dillon 550 for .223 loads. Charge bar is 'ok' for the .45 and I weigh my .308 loads.

 

[acrashb]

I have often wondered why Dillon doesn't carry those..

Because then they wouldn't sell so many spare powder throw assemblies.

 

[Abman]

I bought mine from the local Home Depot, I'll check tomorrow to see if I can get the bin # as I thing I got a couple of extra ones

Seen these on ebay....Any of you guys try these accessory add-on powder adjustment knobs? They seem like a good idea and are reasonably priced.

Plastic model:

http://cgi.ebay.ca/LARGE-POWDER-ADJ...215|66:2|65:12|39:1|240:1318#ebayphotohosting

http://cgi.ebay.ca/POWDER-ADJUST-KN...215|66:2|65:12|39:1|240:1318#ebayphotohosting

Metal version:

http://cgi.ebay.ca/Dillon-Powder-Me...215|66:2|65:12|39:1|240:1318#ebayphotohosting

Regards,

 

[gw]

You can buy the plastic knob shown in the first picture at home depot in the hardware section for alot less

 

[Boomer686]

I bought mine from the local Home Depot, I'll check tomorrow to see if I can get the bin # as I thing I got a couple of extra ones

Sounds good! Thanks!

Regards,

 

[mule]

It's called a flowerette and the size is 5/16"( I think...definitely not 3/8"), from Home Depot. It is soft enough to be pushed onto the adjustment nut and is firm enough to remain in place for fine powder adjustments.....I think the price is $1.99, but I don't remember for sure. It was Abman who passed this idea on to me.

 

[hedgehog]

Very Nice find Mule. Good work. Some will still buy the ebay ones because there dillon blue

 

[Abman]

 

[RePete]

In Ontario they are made by Paulin.

Home Depot part number is 222-840

 

[Sleeper]

thought this deserved a bump