DLASK ARMS CORP. *TUF-22* (Pre-Order Info)

[Petamocto]

...If you order a complete rifle from us we will supply you with 1 magazine at the time of purchase only...

I'm going to be building a full rifle minus the stock, so hopefully with that I can get a mag [the order is going to be over $1000].

Looking at minimum the receiver (#62), plus a Kidd two-stage trigger (black), the bolt and all other internals, plus a 12" black barrel to match the receiver.

I've even get the stock from you, but I already have the Magpul sitting here. Can't wait to get the whole thing put together; thank you for making it.

 

[Scorp]

Thanks for the update Leigh. Can't wait to see the finished product and thanks for doing this for all of us

 

[Engineer]

For myself, personally, I don't necessarily care if the mags aren't available when the rifles are.

Mags are a bonus, summer is short, I can deal with 10 rounders if it means not pushing the timeline.

Can't wait to build #6

 

[Pointdexter]

If someone from CGN were to get a list of people that would like the sterling cerakote on their receiver and gave Dlask that list, would it help with the decision to cerakote some?

I'd be willing to gather that list and email it.

 

[Dlask Arms]

**UPDATE**

The legal work for the magazines is proceeding as we had expected and the magazines should be going into production soon. As things move along I will do my best to keep you guys in the loop as to when the first batch of both magazines and receivers / rifles will be ready to ship.

As an aside, I loaded the sample 3D printed magazine the manufacturer made for us to send to the RCMP and ...it worked flawlessly ! Haha, it's been a while since I have popped off 20 rounds rapid fire. Felt good. Felt REAL good. ( :

 

[PinaKaleada]

Hey Dlask, wondering when those receivers will be ready

 

[powerbench]

Patiently waiting also....

Hey Dlask, wondering when those receivers will be ready

 

[Dlask Arms]

Patiently waiting also....

Soon, soon. We have all of the material in now and are just going through what to make first. Some will be the standard flat-top version (do not fit SR-22) and the rest will be our Limited Edition for the TUF-22 launch. For these we still have the below listed numbers for sale :

10 - 14 - 15 - 16 - 17 - 19 - 20 - 23 - 29 - 30 - 31 - 32 - 35 - 36 - 37 - 39 - 40 - 41 - 42 - 43 - 45 - 46 - 48 - 49 - 51 - 55 - 58 - 59 - 60 - 61 - 63 - 64 - 67 - 70 - 73 - 75 - 76 - 79 - 80 - 83 - 84 - 85 - 86 - 87 - 89 - 91 - 92 - 94 - 96 - 97 - 98

The magazines are coming along as well, they are so far scheduled to be ready for July if all goes as planned.

As another sponsor here mentioned, we have a joint project with them coming out at the end of this week. We took their precision rifle chassis and added our own modifications to make it our own. It includes a rear tang hold down as well which is specific to our TUF-22 pattern and will allow you to mount the TUF-22 receiver in and be as rock solid as possible for the utmost in accuracy. As a complete system it is going to be the acme of it's class and will borderline out shoot the .22lr rounds going down the pipe.

Stand by....

 

[Mark-II]

Hmmm..... I should not have jumped the gun on that Magpul stock, possibly. I didn't see the other announcement, so will wait and see.

 

[Mr. Friendly]

are there any pics of an actual assembled TUF-22?

 

[Dlask Arms]

are there any pics of an actual assembled TUF-22?

Nope...

 

[LAV]

Is that ^^^ what the receivers of the 100 limited run going to look like? Thanks.

 

[budmancan]

I have one of the numbers on order. what is that set up worth? Very interested in the complete package now.

 

[Craftsman]

Looking good! Will this stock be available for the threaded receiver model?

 

[Engineer]

...It includes a rear tang hold down as well which is specific to our TUF-22 pattern and will allow you to mount the TUF-22 receiver in...

Hi,

WRT this statement I assume that the rear tang is a screw on to the TUF-22 a al the KIDD rear tang. This isn't integral to the the reciever is it? The photos from the original post do not show it as such.

 

[Tom E Gun]

I have not been following this thread, since I am not a potential TUF 22 customer, however that really cool Dlask Arms marked aluminum chassis certainly caught my interest. Are any details available? ie:
-will it work on all 10/22 and DAR 22 receivers?
-when will it be available?
-price?

...thanks

 

[Chumlee Bumsnag]

I like how you took that picture. I want to see all pics on the EE like that from now on :^)

 

[Mark-II]

K. I want that stock...

 

[geologist]

I'm on the list for #3 on a complete rifle.

Leigh!

 

[Dlask Arms]

Is that ^^^ what the receivers of the 100 limited run going to look like? Thanks.

Yes. It is almost the same shape as our DAR-22 with some different side markings. Still precision made using a solid block of 7075-T6 aluminum. {These have white crayon in them now (see above pic) thanks to the Lab}