Dlask Turkish Walnut 10/22 stock
- Thread starter HighSpeedLowDrag2023
- Start date
Chrispy123
Member
I’d like to see the end result as well, am intrigued how it looks in the end.
Mine arrived this morning, looks nice!
It's always a bit of a gamble buying wood stocks unseen because the grain patterns will vary. This stock has a couple of very small hints of knots,but all an all I'm stocked on the wood quality!
I'm going to use it with a Grey Birch I picked up when they were leaving Canada heading down to Florida, the Grey Birch has a barrel nut and I will need to remove a bit of wood there to get it to seat properly. Looks like I will also need to open up the width of cutout for the trigger to accommodate the safety button when dropping it in to the stock.... it's a hair to tight as is.
Other then that it looks nice, pretty close copy to the Hogue stock in dimensions with a slight difference in the palm contour at the back of the pistol grip. The Hogue's palm cutout is a bit longer but other then that and the basket weave laser checkering they are the same. The butt pad is a nice medium hard rubber and the stock is pre-drilled for screw in slingstuds.
It's always a bit of a gamble buying wood stocks unseen because the grain patterns will vary. This stock has a couple of very small hints of knots,but all an all I'm stocked on the wood quality!
I'm going to use it with a Grey Birch I picked up when they were leaving Canada heading down to Florida, the Grey Birch has a barrel nut and I will need to remove a bit of wood there to get it to seat properly. Looks like I will also need to open up the width of cutout for the trigger to accommodate the safety button when dropping it in to the stock.... it's a hair to tight as is.
Other then that it looks nice, pretty close copy to the Hogue stock in dimensions with a slight difference in the palm contour at the back of the pistol grip. The Hogue's palm cutout is a bit longer but other then that and the basket weave laser checkering they are the same. The butt pad is a nice medium hard rubber and the stock is pre-drilled for screw in slingstuds.
Well,
I don’t own one but Dlask shipped me one by mistake
I ordered Hogue Thumbhole stock they shipped me Turkish Wooden stock. It was nice and very well built. The butt pad feels very good. However I did not install it, just exchanged for correct order.
You should happy with that stock
Sad to hear many negative reviews recently with Dlask however they did mess up my very first order and I had to wait few weeks after holiday season to have mine exchanged. They charged me twice shipping cost ( mostly my fault since I ordered two different things in two separate orders but they shipped both in 1 shipment, I had a small wish during Christmas time that they would consider ship me a recoil buffer pin if they ship both orders in 1 parcel so they don’t need to return my shipping cost for 2nd order but they did not)
Just got another order delivered today from them for charging handle kit + recoil buffer pin. Might order few other things before they completely close down the shop
I don’t own one but Dlask shipped me one by mistake
I ordered Hogue Thumbhole stock they shipped me Turkish Wooden stock. It was nice and very well built. The butt pad feels very good. However I did not install it, just exchanged for correct order.
You should happy with that stock
Sad to hear many negative reviews recently with Dlask however they did mess up my very first order and I had to wait few weeks after holiday season to have mine exchanged. They charged me twice shipping cost ( mostly my fault since I ordered two different things in two separate orders but they shipped both in 1 shipment, I had a small wish during Christmas time that they would consider ship me a recoil buffer pin if they ship both orders in 1 parcel so they don’t need to return my shipping cost for 2nd order but they did not)
Just got another order delivered today from them for charging handle kit + recoil buffer pin. Might order few other things before they completely close down the shop
Attachments
Last edited:
I really like the "observation tower". as displayed on the upper rifle. Looks good .Mine arrived this morning, looks nice!
It's always a bit of a gamble buying wood stocks unseen because the grain patterns will vary. This stock has a couple of very small hints of knots,but all an all I'm stocked on the wood quality!
I'm going to use it with a Grey Birch I picked up when they were leaving Canada heading down to Florida, the Grey Birch has a barrel nut and I will need to remove a bit of wood there to get it to seat properly. Looks like I will also need to open up the width of cutout for the trigger to accommodate the safety button when dropping it in to the stock.... it's a hair to tight as is.
Other then that it looks nice, pretty close copy to the Hogue stock in dimensions with a slight difference in the palm contour at the back of the pistol grip. The Hogue's palm cutout is a bit longer but other then that and the basket weave laser checkering they are the same. The butt pad is a nice medium hard rubber and the stock is pre-drilled for screw in slingstuds.
Looks like a FLAK gun in some sense...
It's a 3X prism, not a bad optic but the eye relief is short so it needs to be cantilevered to the rear.
Primary Arms came out with a newer generation 1X that has longer eye relief but as far as I know they have not brought out a 3x with longer eye relief so far... all they really need to do is put one more mount option in their kit that extends straight back with minimal rise.
Well that and include some flip up cap options.....
This Grey Birch has a glock style Modular Optic System cutout and came with some adapters for different pistol red dots to mount directly.
It's currently got a M.O.S compatable picatinny rail section bolted on so I can run optics with picatinny clamps.
Mine arrived this morning, looks nice!
It's always a bit of a gamble buying wood stocks unseen because the grain patterns will vary. This stock has a couple of very small hints of knots,but all an all I'm stocked on the wood quality!
I'm going to use it with a Grey Birch I picked up when they were leaving Canada heading down to Florida, the Grey Birch has a barrel nut and I will need to remove a bit of wood there to get it to seat properly. Looks like I will also need to open up the width of cutout for the trigger to accommodate the safety button when dropping it in to the stock.... it's a hair to tight as is.
Other then that it looks nice, pretty close copy to the Hogue stock in dimensions with a slight difference in the palm contour at the back of the pistol grip. The Hogue's palm cutout is a bit longer but other then that and the basket weave laser checkering they are the same. The butt pad is a nice medium hard rubber and the stock is pre-drilled for screw in slingstuds.
I’ve been eyeing these stocks for weeks. In the cart, out the cart - you know the game. Yours is the first firsthand feedback I’ve seen. Thanks for the review!
How is the receiver inlet? Much noticeable wiggle left/right/front/back once receiver is dropped in?
Barrel aligns with centre of barrel inlet?
That grey birch is a smart looking lil gun
