Dominion Arms 12.5" and 18.5 Barrel for Grizzly/Remington 870 Shotgun 79.99 $$$$

rubberdonuts said:
Having seen this I'm almost regretting my "shotgun" purchase. Will the spring shipment accept remington chokes?
Click to expand...


People are always looking for 12.5" barrels. Enjoy your shotgun and when the new barrels threaded for chokes come in, just buy it and sell your old barrel.
 
City Boy said:
People are always looking for 12.5" barrels. Enjoy your shotgun and when the new barrels threaded for chokes come in, just buy it and sell your old barrel.
Click to expand...

Just gonna have it threaded. Glad I asked about the chokes coming in on the new spring batch. Don't want Accu Choke. Got a bunch of Remi chokes kicking around my dad's i plan on commandeering. If anyone does decide to swap their barrel in the spring Ill be interested in their barrel 12.5-14.5.
 
so I have been using the 18.5" barrel, and it seems that the ring that goes around the tube is too thick, I can't tighten the end cap tight enough and it comes loose during use. Is this a common problem with these barrels? I can't really use a barrel that comes loose during use...other than that its a good value, but this is sort of a junky development.

I would like to hear back from the staff if possible? I am thinking about grinding some of the thickness down to allow the end cap to screw on more. I have an 870 wingmaster.
 
The wingmaster barrels use a ball detent to retain the cap vs the notched plastic insert used on the grizzly/express. You can use loctite, some have converted to the ball, or possibly the plastic insert will work in the wingmaster (no dimples)

IMG_5092-vi.jpg

IMG_5091-vi.jpg

http://www.commanderzero.com/wp-content/uploads/2015/01/20150117_143857.jpg
 

Attachments

  • IMG_5092-vi.jpg
    IMG_5092-vi.jpg
    31.7 KB · Views: 966
  • IMG_5091-vi.jpg
    IMG_5091-vi.jpg
    39.3 KB · Views: 960
CanAm said:
The wingmaster barrels use a ball detent to retain the cap vs the notched plastic insert used on the grizzly/express. You can use loctite, some have converted to the ball, or possibly the plastic insert will work in the wingmaster (no dimples)

View attachment 78992

View attachment 78993

http://www.commanderzero.com/wp-content/uploads/2015/01/20150117_143857.jpg
Click to expand...

I am a big fan of your website and company, but to honest, you should put that information on the barrel page. It should specifically be mentioned that the 870 wing master may not be able to get a tight fit on the end cap.

I want to be able to swap barrels, so locktite is not an option.
 
badboybeeson said:
You need a wave washer same that used onany semi autos. This will alow u to use both system of bbl on the DA guns no issue
Click to expand...

After some research, I found advise to use a rubber o ring instead, I'll be trying that out. Also, I have found that the "ring" that goes around the tube is thicker than my other barrel, the end cap doesn't screw on as much, so I need to grind that down to get the cap to screw on more.
 
You must log in or register to reply here.
Back
Top Bottom