Dominion Small Pistol Primers

[misterzr]

Any word when these will be back in stock?

 

[madcow]

Just use their small rifle

 

[misterzr]

I have some rifle ones but wasn't sure if there was an issue with setting them off with a pistol, especially the M&P striker fire's that I shoot that barely hit the primer now. Guessing my 1911's and Thureon carbine would be fine as they hit it pretty hard.

Might make up a few to test drive

 

[pedro55]

I have only gone through a couple of hundred of the small rifle primers on an m&p9, so far 2 light strikes that had to be fed a second time to go off. I didn't have any issues with the dominion small pistol.

 

[mmcintyre1220]

you absolutely cannot use the small rifle primers in a pistol . please refrain from buying them for that purpose as i use them for pistol and i love how i can always find them lol

 

[Ki3t_ly]

I have been reloading 9mm for my p226 with the SRP. Works great! Thinking of ordering another 5000

 

[Ki3t_ly]

Also... Not to hijack but what about LPP?

 

[Calahan]

Also... Not to hijack but what about LPP?

Won't work. SRP will just fall out of the LPP pocket.

Hey, someone had to say it!

 

[Ki3t_ly]

I mean when they'll be back in stock lol

 

[Frank McFarquhar]

I made a mistake , once , by using LRP in .455 Colt . It raised the velocity by 100 f/s . (700 to 800 f/s )
The LRP are about .004 higher that LPP . They fit in revolver but had a few that needed to be hit 2x .

 

[Calahan]

I mean when they'll be back in stock lol

I know. I was just making a joke!

 

[Steijaka]

Any update would be great. Will it ever come back or is it gone forever?

 

[wbaad]

Can am did have a letter from the manufacturer that the small rifle primers were the same...

 

[Mr.Crumbz]

Small rifle primers are working just fine in my pistol reloads. I love the Dominion primers!

 

[pts.fa]

Regardless of what a lot of folks are writing, I wouldn't use the small rifle primers. I've tried ... and there are issues. There are pressure and velocity issues, so depending on your adversity to risk you may or may not want to move forward from that. I figured the increased pressure wasn't an issue for the firearms I'd be using. I created 1000 rounds with identical loads but 500 with S&B SRP and 500 with Dominion SRP. The Dominion SRP worked better in my handguns than the S&B. For example -- my M&P would only shoot about 50% of the S&B but shot about 75-80% of the Dominion. The only pistol I tried that was able to fire them without any issues was my Beretta 92A1. My SIG P226 was 100% with the Dominion and about 95% with the S&B. Other guns I tried, from best to worst, Walther PPQ, M&P, Jericho, and Glock 19. The Glock 19, an otherwise totally reliable gun, shot maybe 70-75% of the Dominion but only 20-30% of the S&B loaded rounds.

I understand that your mileage may vary ... but I thought I'd let you know how it worked out for me.

 

[Redblack]

I've shot about 500 rounds loaded with the dominion srp and they work 100% in my p226 and sp-01 shadow so I plan on buying a whole lot more.

 

[trebor2880]

I mean when they'll be back in stock lol

Just recently they were back in stock, for a very short time and I missed them.

 

[Wiskey1]

i have used about 3000 srp in my pistols without any problem at all..mind you my guns are all steel,,no plastic tupperware guns..

 

[Hitzy]

No issues with the SRP in my 9mm/40s&w 1911's, BHP's, S&W wheel guns, Girsan 92 clones, haven't tried them in the striker fired yet.

 

[Canada Ammo]

Last I heard we should have these in stock by the end of May

Thanks,
Mark