Dry Fire Question

[Jahnj0584]

https://czubstrapiwebsitestorage.bl..._CZ_457_05_2025_en_es_cs_de_fr_48cf870932.pdf

What does page 5 state?

https://czubstrapiwebsitestorage.bl..._Target_12_2025_en_es_cs_de_fr_6d2ab0831c.pdf

Page 4 also says for match chambers.

"does not recommend excessive dry firing"

"Although the design makes the firearm extremely resistant to stress on components from dry-firing (without ammunition), the manufacturer recommends dry-training using blank rounds designed for such purpose."


means it can be done but its not suggested. It's obviously not the best for the bolt, but doing it twice by accident doesnt cause damage.

 

[OkayShooter]

"does not recommend excessive dry firing"

"Although the design makes the firearm extremely resistant to stress on components from dry-firing (without ammunition), the manufacturer recommends dry-training using blank rounds designed for such purpose."


means it can be done but its not suggested. It's obviously not the best for the bolt, but doing it twice by accident doesnt cause damage.

No. But for the OP where he going to do trigger adjustment and will do it more than forgetting to count the rounds and or de compressing the spring. It is wise to use snap caps.

Which would be excessive.

 

[Jahnj0584]

Maybe Im just good, but you can easily get a trigger to a setting within 3-5 attempts. I'd just use a spent casing if I ever gave a rats patoot about this.

 

[cableguy]

Easiest way to go...collect a small bag of spent .22 casings and you're good to go.

Don't spend money on snap caps.

Casings work best and it's good to recycle.

 

[OkayShooter]

Maybe Im just good, but you can easily get a trigger to a setting within 3-5 attempts. I'd just use a spent casing if I ever gave a rats patoot about this.

Aren't you a cocky bastard. Guess CZ should learn from you.

Just because it doesn't happen to you. Doesn't dismiss that it happens.

 

[_Shorty]

https://czubstrapiwebsitestorage.bl..._CZ_457_05_2025_en_es_cs_de_fr_48cf870932.pdf

What does page 5 state?

https://czubstrapiwebsitestorage.bl..._Target_12_2025_en_es_cs_de_fr_6d2ab0831c.pdf

Page 4 also says for match chambers.

Chamber type has nothing to do with bolt/pin design. They're exactly the same.

 

[OkayShooter]

Chamber type has nothing to do with bolt/pin design. They're exactly the same.

Just pointing out. It is in the manual to use snap caps for excessive dry firing.

 

[Jahnj0584]

Aren't you a cocky bastard. Guess CZ should learn from you.

Just because it doesn't happen to you. Doesn't dismiss that it happens.

all ya do is move it 1/2 a turn, notice the Delta in pressure, then make an estimated guess for where ya need it to go.