Dummy Suppressors

[epps]

Now available at Epps, Custom Made to order dummy suppressors. And other muzzle accessories. Made from aluminum or steel and from your design or ours. Come in and see us or shoot us an email at gunsmith@ellwoodepps.com

 

[deagle2008]

cant find them in your site

 

[avroe]

Excited to see photos. I've always had amazing experiences with Epps over the years.

 

[TRich]

Very interested in this. What kind of price would I be looking at for a fake can on an M305?

 

[Remote Six]

How much for a fake can for a CZ858? I would be interested in one that covers most of the 19" barrel.

 

[Duff350]

Very good idea... But:

With picture...
An idea of the price..

Thanks

 

[icedragonmx]

I am game- Beretta 71 in 22lr with a little something to make it look exactly like this-

Will need the barrel internally threaded and set up with an adaptor as pictured so I can shoot it without the supressor too. 1" diameter by 5.98" long aluminum suppressor with 11 degree crown and the steel adaptor barrel internally threaded 3/8"x24 TPI, with a 3/8" threaded length and a regular AR thread pattern for the suppressor/adaptor joint. PM me a price if you can do something this cool!

Edit to add- Cost to do all of the following-
thread the barrel, create the adaptor and create the suppressor- Thanks, E-mail sent

 

[winchester94]

Also interested in price for fake can on a m305

 

[hyho12345]

interested in fake can on my ARs

 

[JAGDMORDER]

Pics, pics, pics, price, price, price.lol

 

[jt_trouble]

Excited to see photos. I've always had amazing experiences with Epps over the years.

Got these photos from Jason, Gunsmith at Epps. I sent him a drawing of something I would want for my SR22 rimfire, he told me he made one that was just about the same as mine but with a 8" OAL for a .223 AR.

As for pricing, I imagine that cost would be different for each one as per your own specs.

This is his ... designed to slip over the barrel and not add too much length to your current set up.

 

[icedragonmx]

I got a reply back on my estimate request. Will post pics when I get it all done

 

[thedigitaldoctor]

Just out of curiosity, has anyone received theirs yet? The last I heard from the Ellwood Epps gunsmith was that he was going to check if the stock barrel for my Beretta 92FS was long enough to thread, or if he can get an extended one. I'm thinking if the dummy suppressor is made of aluminum, threading the stock barrel should be sufficient.

 

[Bad Lieutenant]

Necro-thread!

So... do these guys still offer this service?

Has anyone got a fake can from them?

 

[LuckyOnes]

Yeah no doubt, I'd like to know as well.

 

[Helsinki Cowboy]

.........