enfield part identification help!!!

[GGUTHRIE]

I picked these parts up with some longbranch marked safeties, any ideas as what they are? thanks glenn

 

[HeadDamage]

The hook like things are extractors but I can't say I've seen those washer thinkings on an Enfield, they seem to be shims based on the numbers on them.

 

[GGUTHRIE]

they don't match any of the other extractors i have

 

[HeadDamage]

They might be 7.62 or 22lr extractors, put up a pic of them next to a regular 303 extractor.

 

[John Sukey]

Possibly .308 0r maybe .22 extractors. don't have any spares for comparison.

 

[RobSmith]

Never seen anything that resembles those extractor thingys, but do those washers have any sort of "bumps" on them on the underside ?

With the numbers of them they look like some sort of primitive headspace guage kit.

 

[BEARMAN]

They look sort of like No.4 extractors but they seem different( maybe 7.62 or .22) and seeing you got the numbered washers at the same time they MAY be gauges to check extractor fit. But really just guessing.

 

[Claven2]

Te estractors are probably .308. I suspect the washers are a headspace kit.

 

[stencollector]

They are Cno7 extractors for the 22 rifles. I can't say that I recognise the washers. Can you show them again with something (ie a penny) to get a better idea of their size?

 

[Light Infantry]

Definitely not 7.62 extractors, 7.62 ones have a much wider claw.

 

[green]

CNo7 extractors.
Breeching washers?

 

[buffdog]

Washers

.
How big are the washers? What is the outside diameter, and what size is the hole in them?

Maybe a picture of the washers next to a ruler?
.

 

[GGUTHRIE]

i will post some betterphotos later today, thanks glenn

 

[rgg_7]

Extractors are 22LR used in the CNo7; the washers are stock bolt washers to ensure that the stock bolt does not project too far beyond the butt socket and put too much pressure on the forend thus cracking it. FYI, Ron

 

[GGUTHRIE]

Thanks Ron for the info. Glenn