Extension for a Super Nova

[mechanik]

You can get away without the clamp for a bit but you are going to want it eventually or you'll stress the threads over time.

 

[TRaTSeRiF]

You can get away without the clamp for a bit but you are going to want it eventually or you'll stress the threads over time.

Thanks. Are those pretty universal or will I be looking at a Benelli-specific gold-plated super-duper-uber-premium barrel clamp?

 

[The_Shmoo]

Thanks. Are those pretty universal or will I be looking at a Benelli-specific gold-plated super-duper-uber-premium barrel clamp?

I just got the regular Nordic clamp. Its nice and solid, and is also drilled and tapped for a sling swivel, or maybe a small pic rail.

 

[TRaTSeRiF]

I just got the regular Nordic clamp. Its nice and solid, and is also drilled and tapped for a sling swivel, or maybe a small pic rail.

Who carries them locally? Or will I have to place an order with Brownells?

 

[mechanik]

The Nordic one is sized properly for the groove on the tube.

 

[TRaTSeRiF]

The Nordic one is sized properly for the groove on the tube.

Raising the good point.. So if I got a different one, I'd have to position it outside of the grove?

 

[mechanik]

Raising the good point.. So if I got a different one, I'd have to position it outside of the grove?

No but the groove is pretty wide so the Nordic one is about the only one that will fill the whole groove.

 

[TRaTSeRiF]

No but the groove is pretty wide so the Nordic one is about the only one that will fill the whole groove.

Nordic it is. Thanks for the confirmation. Figured I'd check if I can save the $20 and get a Tacstar, but since it's not the right tool for the job.... On a good note, took out my baby to play and liked her performance (mostly 3" slug fun)

 

[The_Shmoo]

The Nordic clamp is1.5" wide, so theoretically any clamp up to that size should work. The problem is making sure it fits not the profile of the barrel and the profile of the tube.