Falcon Menace 5.5-25x Preorder

Allen Gun Works

Revolted
Rating - 100%
209   0   0
Location
Trenton
We only had about a 50% reply to our waiting list, so we are opening this preorder up to everyone now. This is for the first order. We are only guaranteed 16 pieces. There may be more added, but Falcon wants to ensure all dealers get some on first order. We have 8 spots left on this order.

This order is metric only. MOA versions probably won't be released until Fall.

They will be available in both a 56mm objective and a 50mm objective. They are expected to be ready for shipping from the UK around end May. Given the fact that these are new, I would be prepared for delays possibly into end June just to be safe.

These will be a one piece tube design. Other than the obvious features offered on all Falcon scopes, here are some of the basic specs on them:

FOV is 19.0ft - 4.8ft at 100m
Elevation Travel Range is just over 18.0MRAD
First Focal Plane magnification
30mm Tube

Pricing on all reticles and objective sizes will be $544.49CDN plus tax and shipping. ($586.71 total outside Ontario, $625.27 in Ontario with PST added).

Available models are as follows:

Falcon Menace 5.5-25x50FFP ML16 Skeleton – M25(50)ML
Falcon Menace 5.5-25x50FFP Enhanced Mildot – M25(50)EMD
Falcon Menace 5.5-25x56FFP ML16 Skeleton – M25ML
Falcon Menace 5.5-25x56FFP Enhanced Mildot – M25EMD

As always, we accept EMT and (FRAUD ALERT) to mike@allengunworks.com. We can also do money order and direct deposit to TD Canada Trust. We are unable to take CC directly due to outrageous bank fees!!

We will be taking orders until 23 May unless the original 16 sell out faster. Any requests above 16 will be put on a waiting list for the next order in July. I will be away for a few weeks starting 25 May and will have limited access to email. This is why we are taking the orders early. If the shipment arrives before I return my wife will be shipping the scopes.

To preorder we will need:

- Full address
- Method of payment (All preorders must be prepaid in order to ship them in bulk when they arrive).
- Choice of reticle and objective size by product number bolded in red above.

Please send all questions or orders to mike@allengunworks.com. Please do not send questions or orders via PM.
 
Need help deciding on which reticle would be better for me, what are the pro's and cons of the ML16 Skeleton & Enhanced Mildot?

any IR models available in the future?

instructions and warranty papers included?

sunshade?

thanxs
 
There is no difference "technically" between the two reticles. Personal preference really. One is the standard mildot with half mil hash marks (EMD) and the other has slightly larger hash marks where the mildots would normally be (ML16).

Falcon provides a very basic set of instructions which we have adapted slightly into a small pamphlet that ships with the scope. The best in depth information can be found right here on CGN or elsewhere on the net.

All Falcon scopes ship with one sun shade and flip up lens covers.
 
Can you make the pamphlet into a PDF and post it on your site? I would appreciate it.
 
We have extended orders for a bit longer. There was a slight delay in manufacturing due to some patchy anodizing. Once this is fixed the order will ship. We have 6 spots left on this order.
 
We have extended orders for a bit longer. There was a slight delay in manufacturing due to some patchy anodizing. Once this is fixed the order will ship. We have 6 spots left on this order.

What do you mean by "slight delay"? Days, weeks, Months:eek:? what is the new ETA?

looking forward to getting this scope mounted. I'm also quite curious what others have picked as objective size and reticle.
 
Yes. It is just a cosmetic issue that is holding them up. Once that is remedied they will ship.

56mm seems to be the most popular so far in objective size. ML16 is the most ordered reticle.
 
Mike,
Just wondering if there was going to be any of the 4-14x44 on this order. If so what's the pricing gonna be, same as the last ones?
thanks
 
I was expecting the order to leave this week, but the UK now requires export paperwork on scopes (hopefully it won't get as bad as the US!!!). The paperwork takes up to 10 working days to clear. I am hoping the order will leave the UK in a couple of weeks. Another unexpected hiccup, but at least it isn't a scope problem!!! I will post more when I have confirmation that the paperwork has cleared. It only takes about three days to get here once it is shipped.
 
Really!?!?!? That f'n sucks.:(

Hey mike do you have any 0moa EGW picatinny bases available for a RH SA rem700? and do you have any that haven't been tailored to your specs (thicker/higher)?
 
Back
Top Bottom