Fat .30 custom Lee mould buy

slug

slug

CGN Regular
Rating - 100%
1240   0   2
Location
Sudbury, Ont.
A while back, some of the fellows on the cast boolit forum had Lee make up a special run of a custom design "Fat .30" 6 cavity moulds that would make good
bullets for the .303B. 7,65 Mauser, 7,7J, and lots of them.
I started another thread with them and there is some interest in getting a second batch made up. The cost is US$56 delivered in the US and about US$60 for mailing to Canada or about $70 of our tunkered out Canabucks.
If you want a Lee 6 banger .303 mould, this is your chance. BTW, if you haven't used a Lee 6 cavity mould, they are nice. Not like the flimsy single and double cavity moulds.

Here's the link to get more info:
http://castboolits.gunloads.com/showthread.php?t=5035
 
I'd love to see a Lee 6-banger .45/70 mould for their high ballistic coefficient 500gr bullet. It's similar to the Postell bullet.
 
Group buys MUST be approved by greentips. Please PM him for permission before going any further with this.;)

slug said:
A while back, some of the fellows on the cast boolit forum had Lee make up a special run of a custom design "Fat .30" 6 cavity moulds that would make good
bullets for the .303B. 7,65 Mauser, 7,7J, and lots of them.
I started another thread with them and there is some interest in getting a second batch made up. The cost is US$56 delivered in the US and about US$60 for mailing to Canada or about $70 of our tunkered out Canabucks.
If you want a Lee 6 banger .303 mould, this is your chance. BTW, if you haven't used a Lee 6 cavity mould, they are nice. Not like the flimsy single and double cavity moulds.

Here's the link to get more info:
http://castboolits.gunloads.com/showthread.php?t=5035
Click to expand...
 
Fat .30

This isn't about a group buy on CGN. This is about a group buy that's available on another forum.
Yes, .303's work best with a gas check.
 
You must log in or register to reply here.
Back
Top Bottom